MYUAV Mtow 50kg Tethered Drone Powered By Tether Power Station Large Load Drone

MYUAV Mtow 50kg Tethered Drone Powered by Tether Power Station

1. Typical characteristics

30 kg load capacity
The maximum load capacity can reach 30KG. It supports the installation and exchange of Megaphone, photoelectric pod, matrix lighting, gas detector and other loads to meet the industrial application needs of emergency rescue, repair and emergency rescue.

Intelligent KX Flight Control

The KX autopilot adopts aviation grade manufacturing technology; Adopting a modular design of core board and expansion board; Equipped with a series of emergency protection measures such as GPS failure autonomous landing, link failure autonomous return, low voltage autonomous return, and intelligent fault diagnosis; Ensure human-machine safety.

Carbon fiber integration
The X6S six rotor drone adopts a high-temperature molded carbon fiber integrated molding process, and the high specific strength and high specific stiffness characteristics of carbon fiber composite materials can greatly ensure the lightweight, miniaturization, and high performance of the drone structure.

Tethered power supply/lithium battery power supply
Support dual modes of tethered power supply and independent lithium battery power supply. In tethered power supply mode, provide continuous drone power supply and support 24-hour hovering in the air; In the independent lithium battery power supply mode, it provides a maximum no-load endurance of 60 minutes.

2. H12 series digital image transmission remote control
The H12 series digital image transmission remote control adopts a brand new surging processor, is equipped with an Android embedded system, uses advanced SDR technology and super protocol stack, making image transmission clearer, with lower latency, longer distance, and stronger anti-interference. The H12 series remote control is equipped with a dual axis camera, supporting 1080P digital high-definition image transmission; Thanks to the dual antenna design of the product, the signals complement each other, and combined with advanced frequency hopping algorithms, the communication ability of weak signals is greatly increased.

1080P digital high-definition image transmission
The H12 series remote control is equipped with a dual axis camera to achieve stable transmission of 1080P real-time digital high-definition video.

Ultra long transmission distance
The H12 digital integrated link can transmit up to 10km;

Waterproof and dustproof design
The product has been protected against water and dust at the body, control switches, and various peripheral interfaces.

Industrial level equipment protection
Developed using meteorological silicone, frosted rubber, stainless steel, and aviation aluminum alloy materials to ensure equipment safety.

High definition and high brightness display screen

inch IPS display screen. 2000nits highlighted, 1920 × 1200 resolution, large screen size.

High performance lithium battery
Equipped with high energy density lithium-ion batteries and 18W fast charging, it can operate for 6 to 20 hours at full charge.

Drone Specifications

Six rotor aircraft
Symmetrical motor wheelbase	1880mm
Overall dimensions	2000 mm x 2000 mm x 730mm (unfolded) 880 mm x 920 mm x 730mm (folded) L/W/H
Propellers specification	diameter * pitch: 36x7 inch
Maximum ascent speed	8 m/s
Maximum descent speed	2 m/s
Horizontal flight speed	Positioning mode: 5m/s Motion mode: 8m/s Attitude mode: 20m/s
Maximum tilt angle	Positioning mode: 30° Motion mode: 30° Attitude mode: 30°
Maximum rotational speed	120°/s
Maximum wind speed resistance	Level 8
Empty weight	17.8 KG
Maximum load	30KG
Standard flight time	≥55 minutes (empty)
Charging time	40 minutes
Working environment temperature	-40ºC to+70ºC
Flight altitude	≥6000 meters
Flight humidity	<90%
Flight altitude	≥2000 meters
Flight modes	Manual, automatic, fixed altitude, fixed point, motion, attitude
Satellite positioning module	GPS/GLONASS or BDSS/GLONASS dual mode GPS Beidou satellite (triple positioning)
Hover accuracy	Vertical: ±0.5 m (when GPS positioning is working normally) Horizontal: ±0.5 m (when GPS positioning is working normally)
Protection level	IP56 dustproof and waterproof, suitable for flying in moderate rain weather
Body material	Carbon fiber material, lightweight, high strength, and corrosion-resistant
Control method	APP ground station/remote control
Operation time	From transportation state to flight state ≤1 minute (2 people)
Task payload	It can provide multiple interfaces and simultaneously mount multiple task payloads

FAQ

**Q1: What is the tethered drone of Maiuway Technology? **.
**A1:** Maguway Technology Nanjing Co., Ltd. is a professional company specializing in the development and production of tethered unmanned aerial vehicle (UAV), which is a kind of UAV system that can stay in the air for a long time and provide stable power supply through continuous connection with the ground station through cables. This type of drone is not limited by battery life and is suitable for performing a variety of tasks that require sustained operations, such as communication relay, monitoring, lighting, mapping and so on.

**Q2: What is the maximum payload of a Maguway tethered UAV? **.
**A2:** The company has successfully developed a number of tethered UAVs in different payload classes, including but not limited to the 12KW-60KG high payload tethered UAVs and the 30kg tethered relay UAVs communication system. This means they can carry payloads ranging from a few kilograms to tens of kilograms to meet the needs of different application scenarios.

**Q3: How is the Maguway tethered drone powered? **.
**A3:** Maguway's tethered drones are connected to ground power via a dedicated cable, which not only transmits data signals, but also provides continuous power to the drones in real time, so as to achieve long-term or even all-weather uninterrupted flight.

**Q4: What are the application scenarios of Maguway's tethered drones? **.
**A4:** MaiYUwe tethered UAVs are used in a wide range of scenarios, including but not limited to:
- Long-term aerial surveillance and reconnaissance
- Provide relay services as a temporary or emergency communication base station
- Night lighting and search and rescue operation support
- Terrain mapping and environmental monitoring
- Automation tasks for specific industries, such as intelligent spraying

**Q5: Is Maguway still developing new tethered drone technologies or products? **.
**A5:** Yes, Maiuway Technology has been continuously innovating and developing, such as their AI tethered UAV spray system and the on-board power system of 30kW tethered UAV under development, which show that the company continues to broaden the application field and technology boundaries of tethered UAVs. We are committed to providing customers with advanced UAV solutions with higher loads, longer endurance and more functions.

Myuav's products are mainly used in tethered lighting, communication relay, environmental monitoring, and other fields. In the domestic market, the company has accumulated a large number of customers, including leading companies in the power, communication, environmental protection industries, and has obtained more than ten patent authorizations.

In the international market, we have established long-term cooperative relationships with multiple overseas companies and has conducted business in Europe, the Middle East, America and other regions.

MYUAV aims to build solid products and services, committed to providing high-standard tethered drone system solutions for global customers.