LED Bulb Glue Dispensing Machine with Four-station Round, Text Demonstration Programmer, and 300RPM Motor Speed

1, Four work stations in cycle, the designed capacity is 1000~1500pcs/h.

2, Equipped work piece detector to decide gluing or skip.

3, Gluing track can be set as full circle, single point or segmented arc etc.

4, Working mode can be four-station or two-station.

5, It is easy to learn and operate with touch screen and buttons, for different glue with different settings ensure the best performance.

Choosing the type of dispenser

1.Standard dispenser
Syringe + dispensing controller, stable glue output, clean break, no leakage of glue dripping glue needle angle adjustable.

2.Sleeve Dispenser
Suction type dispensing valve + 330ML sleeve, specially designed for the branch silicone within 330ML, easy to use, no leakage of glue dripping, clean break.

3.Pressure drum dispenser
Pressure barrel + dispensing valve, stable glue quantity, clean break, no leakage of glue dripping. Suitable for dispensing large amount of glue, bulk glue products, save glue, save labor.

4.Dual station dispenser
Dual-station alternating work, while loading and unloading while dispensing, without stopping the machine, the efficiency is doubled.

5.Hot Melt Glue Dispenser
The hot melt glue cartridge is placed in a special heater, the glue is extruded using a dispensing controller, and the three-axis manipulator completes the dispensing path.