LM809M3X-4.63/NOPB Power Path Management IC Supervisory Circuits 3-Pin Microprocessor Reset Circuits

LM809M3X-4.63/NOPB Power Path Management IC Supervisory Circuits 3-Pin Microprocessor Reset Circuits

1 Features

• Precision Monitoring of Supply Voltages – Available Threshold Options:

2.63 V, 2.93 V, 3.08 V, 4.38 V, 4.63 V

• Superior Upgrade to MAX809 and MAX810

• Fully Specified Over Temperature

• 140-ms Minimum Power-On Reset Pulse Width, 240-ms Typical

  • – Active-Low RESET Output (LM809)

  • – Active-High RESET Output (LM810)

• Ensured RESET Output Valid for VCC ≥ 1 V

• Low Supply Current, 15-μA Typical

• Power Supply Transient Immunity

  
  

2 Applications

• Factory Automation

• Building Automation

• Programmable Logic Control

• Renewable Energy

• Microprocessor Systems

• Computers

• Controllers

• Intelligent Instruments

• Portable/Battery-Powered Equipment

• Automotive

The LM809 and LM810 microprocessors supervisory circuits can be used to monitor the power supplies in microprocessor and digital systems. They provide a reset to the microprocessor during power-up, power- down and brown-out conditions.

The function of the LM809 and LM810 are to monitor the VCC supply voltage, and assert a reset signal whenever this voltage declines below the factory- programmed reset threshold. The reset signal remains asserted for 240 ms after VCC rises above the threshold. The LM809 has an active-low RESET output, while the LM810 has an active-high RESET output.

Seven standard reset voltage options are available, suitable for monitoring 5-V, 3.3-V, and 3-V supply voltages.

With a low supply current of only 15 μA, the LM809 and LM810 are ideal for use in portable equipment.

Device Information