| Sign In | Join Free | My entremaqueros.com |
|
| Sign In | Join Free | My entremaqueros.com |
|
| Categories | Temperature Humidity Chamber |
|---|---|
| Brand Name: | iqualitrol |
| Model Number: | QYG-5000 |
| MOQ: | 1 Set |
| Payment Terms: | T/T |
| Supply Ability: | 5 Sets per month |
| Delivery Time: | 30 Working Days |
| Packaging Details: | Plywood Pallet |
| application: | simulating temperature and climatic indoor and outdoor conditions with global irradiation |
| Light Wavelength: | Full-spectrum light DIN75220 and GJB150.17-86, simulating sunlight 280-3000nm |
| Air conditioning duct: | Heater, evaporator (also dehumidifier), humidifier, overheat protector, water supply and drainage devices |
| Observation window: | 1 transparent electric heating film anti-condensation insulated tempered glass window |
Multiple Sunlight Simulation Temperature and Humidity Test Chamber QYG-5000
Brief Introduction:
The Q1-TEST Solar Simulation Test Chambers are state-of-the-art test units for simulating temperature and climatic indoor and outdoor conditions with global irradiation.
The QYG-5000 simulates direct sunlight, heat, cold and humidity in order to test the many small and large items of day-to-day life that are subjected to different levels of solar radiation.
These environments affect the service and operating conditions of various products exposed to these environmental extremes. They cause colors to fade and accelerate the ageing of materials.
Technical Specifications:
| Name and model | Sunlight Simulation Test Chamber QYG-5000 |
| Dimension and weight | |
| Internal Volume | 5600L |
| Internal Dimension | W1200mm×H1800mm×D2600mm |
| External Dimension | W1450mm×H2750mm×D3850mm |
| Net weight | About 1950kg |
| Performance | |
| Test Conditions | Ambient temperature is 25℃, relative humidity ≤85% Under the condition that there are no samples in the test chamber |
| Test Methods | GB/T 2423.2 Test B: High Temperature Test Method, GB/T 2423.3 Test Ca: Constant Damp Heat Test, GB/T 2423.24 Test Sa: Simulation of Solar Radiation on the Ground, GJB 150.3A High Temperature Test, GJB 150.9A Damp Heat Test, GJB 150.7A Solar Radiation Test (Test Curve), DIN 75220 |
| Temperature Range | -20℃～+150℃ |
| Temperature fluctuation | 0.5℃(if by GB/T 5170.2, then indicates ±0.25℃) |
| Temperature deviation | ±1.5℃ |
| Temperature uniformity | 1.0℃( Damp heat test ,humidity >90%RH) 1.5℃(Temperature <100℃) 2.0℃ No sunlight |
| Light Parameters | |
| Light Illumination Wavelength and Test Conditions | Full-spectrum light DIN75220 and GJB150.17-86, simulating sunlight 280-3000nm |
| Irradiation intensity | (50–1500) ±10% W/m² (adjustable, minimum setting is 50 W/m², distance between light source and sample >0.76 m, distance adjustable), and can continuously record during the test, equipped with a lux meter |
| Irradiation uniformity | Within 1㎡: 1000W/m2±100, 800W/ m2±80 W/m2 |
| Blackboard temperature | Display and configure 1 BST; (blackboard temperature is not controlled during high and low tests) |
| Optical filter glass | Equipped with DIN 75220 optical filter glass (removable) |
| Lamp position | The lamp tube is outside the equipment, at a distance of no less than 1.5 meters from the bottom of the equipment, located at the top. |
| Temperature and Humidity Rise and Fall Requirements (No Light) | |
| Heating Time | -20℃ →+120℃:≥2℃/min |
Cooling Time (Ambient Temperature 23~28℃) | +120℃ →-20℃:≥1℃/min |
| Humidity Range (Humidity range when the light is off) | (10～98)%RH |
| Relative humidity deviation | ±2.0%RH(Humidity＞75%RH) ±3.0%RH(Humidity≤75%RH) |
| Work noise | ≤70dB(A)( Measured in a soundproof room with few echoes at an ambient temperature of 25°C; the average of 8 test points was taken; each test point is 1 meter horizontally from the noise source and 1 meter above the ground. ) |
| Structural Features | |
| Thermal insulation enclosure structure | Exterior wall material: double-sided galvanized steel sheet,
surface sprayed with plastic (q1-test standard beige) Interior wall material: stainless steel sheet SUS304 Cabinet insulation material: rigid polyurethane foam, fiberglass Door insulation material: fiberglass |
| Air conditioning duct | Fans: 4 Heater, evaporator (also dehumidifier), humidifier, overheat protector, water supply and drainage devices, dry bulb temperature sensor, wet bulb temperature sensor, wet bulb water pan |
| Door | Double-hinged door, left hinge, right handle (when facing the front
of the cabinet door) Door equipped with an observation window and internal lighting Door frame equipped with an anti-condensation electric heating device |
| Observation window | 1 transparent electric heating film anti-condensation insulated
tempered glass window (located on the door) Visible area approximately: W350mm × H500mm Window frame is equipped with an anti-condensation electric heating device |
| Test Ports | 2pcs, φ100mm, on left side of chamber |
| Light | 1pc, 3W, High-efficiency long-life LED light source, located on the door |
| Control panel | Controller display screen, USB interface, RJ network interface Main power, over-temperature protection controller (right side) |
| Standard Delivery | |
| Shelf | Adjustable stainless steel sample rack, 1 tier, load capacity
(evenly distributed): 50kg/tier (Total cumulative load of samples inside the box should not exceed: 100kg) |
| Caster | Six swivel caster wheels. |
| Air conditioning system | |
| Heat transfer methods | Air circulation forced convection heat transfer |
| Air circulation device | Centrifugal fan, long shaft with external motor drive |
| Air heating method | Nickel-chromium alloy electric heating wire heater Heater control method: Contactless equal-cycle pulse width modulation, SSR (solid state relay) Heater power: 12kW |
| Air cooling method | Evaporator direct cooling |
| Refrigeration system | |
| Way of working | Air-cooled dual refrigeration system |
| Refrigeration compressor | Mechanical compressor |
| Condenser | Finned Tube Heat Exchanger |
| Condensing Evaporator | Plate heat exchanger |
| Evaporator | Finned Tube Heat Exchanger |
| Throttle device | Electronic pulse quick-opening cold-end flow cutoff method |
| Refrigerant | R404a R23 ( The ozone depletion index is 0 in all cases) |
| Refrigeration machine control method | The control system automatically adjusts the chiller operation to
the optimal energy-saving condition according to test conditions Compressor suction gas cooling circuit Evaporation pressure regulating valve Condenser fan automatic speed control |
| Humidification system | |
| Humidifier | Boiler-type heating and humidification method Stainless steel armored heater Heater control method: contactless equal-cycle pulse width modulation, SSR (solid-state relay) Water level control device, heater dry-burn protection device Humidifier power: 3.6 kW |
| Humidification system water supply | |
| Water supply method | Pump lift |
| Water supply device location | Side water tank (electric suction and automatic water supply) |
| Water tank | 20L |
| Water quality | Resistivity≥500Ω·m |
| Other configurations | |
| Power cable | One five-core (three-phase four-wire with protective earth) cable (about 5 meters long) |
| Specimen power supply control terminal (optional) | Relay contact control, within AC240V, 2A (when operating normally, the contacts are closed; when the equipment is stopped or faulty, the contacts are open). Strongly recommend that users use control terminals to control the power on/off of the test sample, to ensure that the power connected to the test sample is reliably cut off when the equipment fails or stops. |
| Main power leakage circuit breaker | Main power input, leakage circuit breaker and overload circuit
breaker Rated residual current: 30mA |
| Safety device | |
| Test Chamber | Adjustable over-temperature Test chamber temperature fuse Air regulation channel limit over-temperature Fan motor overheating Power distribution control cabinet opens power-off protection Cabinet door opening (during operation) triggers alarm and multiple openings cause refrigeration system fault alarm protection |
| Refrigeration system | Compressor Overheating Compressor Overcurrent Compressor Overpressure |
| Humidification system | Humidification heat pipe overheat protection Humidification water shortage abnormal Water tank water shortage abnormal |
| Electrical control system | Main power phase sequence and phase loss protection Main power overvoltage and undervoltage protection Leakage protection Overload and short circuit protection |
| Power Supply | |
| AC380V/50Hz three-phase four-wire protective grounding Voltage range: AC (380±10%) V Allowable frequency fluctuation range: (50±0.5) Hz Grounding resistance of the protective ground wire should be less than 4Ω It is required that the user provides an air switch or power switch of appropriate capacity at the installation site for the equipment, and this switch must be used exclusively for this equipment (recommended power switch capacity: 83A) | |
| Current | 45A |
| Maximum continuous operating power | 36.5kW (Data obtained from the test after running for one hour at an ambient temperature of 25°C, without a sample, under stable operating conditions) |
|
Cold Heat And Ambient Thermal Shock Test Chamber QTS-80-3 With High Accuracy
Desktop Programmable Temperature Humidity Test Chamber For Computer Components
Temperature And Humidity Environmental Test Chamber With CE ISO SGS Certification
Two Chambers Moveable Thermal Shock Test Chamber QST2-1000S
Chamber Type UV Aging Test Machine ASR-UV200
1000L Temperature Humidity Test Chamber Mechanical Convection System
Climatic Environmental Cold And Heat Shock Test Chamber For Metal And Plastic
Cold Balanced Control Alternate Temperature and Humidity Environmental Test Chamber
Intelligent System Temperature Humidity Test Chamber Energy Electricity Water Saving
80L Three Zones Cold Hot Impact Thermal Shock Chamber For Metal And PlasticTesting
