Motor 110kw Speed 120m/Min Metal Wire Drawing Machine Fast Speed

Motor 110kw Speed 120m / Min Cold Rolling Steel Wire Drawing Machine


Introduction of Cold Rolling Steel Wire Drawing Machine:

1. The reducer adopts the international reducer, which has large torque, low noise and strong durability.
2. The double-side reel is coated with cemented carbide or wear-resistant material.
3. Adopting the most advanced frequency conversion or electromagnetic technology in the world, it can save 40-60% of electricity, the lowest power consumption per ton is 8-10 degrees, the line speed can reach 90-230 meters per minute, and the production efficiency is improved by more than 40%. Protection of power transmission and transformation systems and electrical equipment is not damaged, which can greatly extend the service life of the machine.
4. Rolling the shell body is cast with 45# pure steel, never cracking (Note: other manufacturers cast iron casting). The rolling mill turbine structure is integrated into one, and it is cast in 45# pure steel. It has no components, large pulling force, wear resistance, continuous teeth and durability.
5. Bracket with cast steel adjustable bracket.

Features of Cold rolling Steel Wire Drawing Machine:

When diameter is less than 10mm, the speed can reach 180m/min.
When wire diameter is 12MM, speed can reach 120 meters/minute.

A set of 10mm and 12mm roller can be made three slots for three diameters, with one slot life of 1300-1500T. It can be repaired 3-4 times, and each time after repairing, it can continue roll 1300- 1500T. Then the output of one set of roller is about 6000T * 3 tanks = 18,000 tons of life. If the wire diameter is smaller, the roller can be made four slots.

Through the cold rolling of the ordinary hot-rolled coil garden rebar (Q235) and induction tempering to achieve "high-ductility cold-rolled ribbed rebar", CRB600H, CRB650H, and CRB800H rebars can be produced, so that the elongation rate of the cold-rolled ribbed rebar is greatly increased. Improve the use of cold rolled ribbed steel.

1. This device adopts PLC touch screen numerical control system to make the operation easier.
2. The production line adopts the most advanced international frequency conversion and servo technology or independent frequency conversion control technology, and it effectively protects the power transmission system and equipment from damage. It maximizes the service life of the machine. It can save electricity 30-40%, the maximum line speed can reach 190 meters, increase production efficiency by more than 40%.
3. We adopt self-developed reducer as the national patented product, which is the fastest speed in China, simplifies the structure of the production line, and makes the equipment more reasonable and compact. (The speed reducer between the main reducer and the main rolling mill is omitted and the deceleration is reduced. Due to the long transmission distance of the machine and many problems connecting the flanges, it effectively improves the transmission efficiency by more than 30%, and improves the stability of the equipment by more than 60%. It effectively improves the production efficiency of the equipment.

Production flow:

Wire pay-off --- Rust remover ---Scaling and reducing wire machine --- Wire milling machine --- Wire coiling machine --- Finished product rack

Technical Parameters of Cold Rolling Steel Wire Drawing Machine:

Photos of Cold Rolling Steel Wire Drawing Machine:

Anping Dixun Wire Mesh Products Co., Ltd. is located in Anping county, which is the famous Wire Mesh hometown of China.  We are professional manufacturer who make various types wire mesh machines in China. We have advanced technology, modern equipment, complete quality control system and strong technical force to supply full range of wire mesh machines and production line for worldwide customers. With good reputation, we have been exporting our products to the world.

We are a professional factory that manufactures all kinds of wire mesh machines.With having first-class wire mesh machines,scientific technology and quality inspection system to ensure the quality of wire mesh products.The company mainly supplies: Wire Mesh Welding machine, Reinforcfing mesh welding machine, Fully automatic fence mesh panel production line, Double wire fence mesh panel welding machine, Fence mesh panel welding machine, Automatic construction mesh welding machine,3-6mm rolling mesh welding machine, Razor Barbed Wire Machine, Chain Link Fence Machine,  Fixed knot fence machine, Welded Wire Mesh Machine, Wire Drawing Machine, Steel Grating Welding Machine.We can manufacture complete product design,part working and machine assemble,strong technical strengthen and good after-sales service can meet customer's need.

As a professional manufacturer.We seek existence by quality and development by reputation.We have more than 20 researchers with high skills.The product by our machine has various kinds and high quality.We can make different specifications according to client's demand. So far. We have established long-term business relationship with Russia,Vietnam, Philippines, Saudi Arba, South Africa, Singapor,Malaysia,Indonesia, Poland, Nigeria, Algeria, Zambia, Mozambique, Brazil,etc.Clients are very satisfied with our machine quality and after-sales service.