Insert CNMG 1606 Lathe Turning Tool Tungsten Carbide Inserts

Quick Detail:

• Excellent material
• New coating technology
• Fine process
• High finish

Description:

• The CNMG 1606 tungsten carbide inserts used for stainles​s steel castings is high toughness and easy to use, more resistant to high temperature, and suitable for different working conditions; Spraying with stress accumulation method below 1000 degrees makes the coating thicker and more durable; The original powder is used for pressing, the cutting edge strength is high, and the chip breaking groove edge band is relatively small, which can reduce cutting pressure, reduce friction and reduce loss; The trimming blade design makes the blade more durable and has a higher machining finish.

Specifications:​

Notice:

• The carbide lathe insert shall not be collided or dropped on the ground and must be handled with care.
• Before installing the tungsten carbide lathe insert, the performance and purpose of the saw table must be confirmed to ensure that the cutting direction indicated by the blade arrow is consistent with the rotation direction of the saw table. It is strictly prohibited to install in the opposite direction. Wrong installation direction may cause the blade sawtooth to fall off, so as to prevent accidents.
• After installation, it is necessary to confirm whether the central hole of the tungsten carbide lathe insert is firmly fixed on the flange plate of the saw table. If there is a gasket, the gasket must be sleeved; Then, gently push with your hand to confirm whether the blade rotates eccentrically.
• When using, do not exceed the specified high speed
• When the tungsten carbide lathe insert is not used, hang the blade vertically on the dry shelf.

Applications:

Our turning carbide inserts could to be processed Alloy steel, Tool steel, carbon steel, stainless steel, Cast iron and Titanium alloy. Working material as following: