Single Phase Photovoltaic Variable Frequency Inverter Grid Connected KD600 MPPT 220V

Product Images

---

---

---

Models and Specifications

Product Application

---

---

K-Drive VS Other brands

Performance	Common brands	K-Drive
Applicable motors	Asynchronous motors	Asynchronous /synchronous motors
Starting torque	2.0Hz, 150% (sensor-less vector control) 0Hz, 180% (closed-loop vector control)	0.5Hz, 180% (sensor-less vector control) 0Hz, 200% (closed-loop vector control)
Speed adjustable range	1:100 (SVC), 1:1000 (VC)	1:200 (SVC), 1:1000 (VC)
Ambient temperature (no derating required)	-10-40ºC	-10-50ºC (for most of the models)
Rated input voltage	208VAC-400VAC	208VAC-480VAC
Communication	Modbus RTU//ASCII	Modbus RTU//ASCII Profibus-DP, CANopen, etc.
Position control (fixed length, or angular positioning)	×	√
Field weakening control	×	√
Autotune online	Online	Online & Offline
Short-time ramp-up	Trip	No trip
Customized features (software and/or hardware)	Unprocurable or no experience	Procurable with rich experience

How to install variable frequency inverter(vfd)

The installation process for a Variable Frequency Drive (VFD) can vary depending on the specific model and manufacturer, so it's important to refer to the manufacturer's instructions and guidelines. However, here are some general steps that can be followed:

1. Select a suitable location: Choose a location that is clean, dry, and well-ventilated, with adequate space for the VFD and any other associated components.

2. Mount the VFD: The VFD should be mounted securely on a flat, vibration-free surface, and any wiring should be secured and protected from damage.

3. Connect power: The power supply for the VFD should be connected according to the manufacturer's instructions, which typically involve connecting the VFD to a suitable AC power source.

4. Connect the motor: Connect the motor to the VFD according to the manufacturer's instructions, which may involve wiring the motor to the VFD's output terminals.

5. Configure the VFD: Follow the manufacturer's instructions to configure the VFD for the specific application, which may involve setting parameters such as maximum and minimum speeds, acceleration and deceleration rates, and overload protection settings.

6. Test the VFD: Once the VFD is installed and configured, test it thoroughly to ensure that it is operating correctly and safely. This may involve running the motor at different speeds and loads and checking for any issues or abnormalities.

It's important to note that the installation process for a VFD should only be attempted by qualified personnel who are familiar with electrical systems and safety procedures. Improper installation can result in damage to the VFD or motor, as well as serious injury or even death.

Who We Are

Shenzhen K-Easy Automation Co.,Limited. a Professional AC drive, Frequency Inverter, VFD, enterprise which has been specializing in Researching, Manufacturing and Trading high, medium and low voltage frequency inverter, providing our clients with integrated system solutions. We have professional R&D and devoted management team with more than 20 years’ experience of theoretical research, product development and quality management. We adopt SPWM, sensorless vector control and vector and torque control technology in our VFD series inverters, which has reached the international advanced standard. The products can directly replace or to be equivalent of Europe and the United States, Japan and other brands, providing customers with a powerful technical support.

We have achieved popularity and qualification in VFD industry. Quality is the life of enterprise.

We have built up a comprehensive product family. Frequency inverters' power covers the range from 0.4 to 630kW, and voltage range is between 220V and 480V. More than inverters are running smoothly 300, 000 units at different industrial sites.

We believe “quality is life ”,so we will test all products before shipment,All Module of our VFD will be used quality is life with Infenion only, With years of persistence, the total failure ratio of Our frequency inverters has been controlled below 1%. We never lose a customer because of the quality problem;

With Strong R&D and Engineer Team, makes our after-service very easy, For all doubts and requesting for technologies supporting, We can offer detailed Solution without delay, so for us,“Not Only Products, But also solutions”;

Join us, enjoy the business.