1KN 20KN EV Battery Testing Equipment UL2580 Lithium Battery Cell Testing Equipment

UL2580 Electric Vehicle Lithium Battery Cell Crush Testing Equipment

Complied Standards & Clauses

UL 2580:2020 STANDARD FOR SAFETY Batteries for Use In Electric Vehicles Annex B2.4 and Annex D3.3

IEC 62133-2012clause 7.3.6

UN38.3 ,UL 1642

Equipment Overview

Application: It is used to simulate all kinds of batteries in use, transportation, storage, or handling home waste, the battery suffers from squeezing and acupuncture.

Test Principle:

Extrusion: Place the battery between two plates,13.0 ± 0.78 kN of extrusion of 13.0 ± 0.78 kN is applied to the plate, and the battery should not occur outside, and fire and explosion.

Acupuncture:The test should be carried out at ambient temperature of 20 ° C ± 5 ° C,(the contact of the thermocouple is fixed on the large surface of the battery) the battery having a thermocouple is placed in a ventilation cabinet, pierced the center position of the largest surface of the battery with a diameter of 2-8 mm to 10 mm / s to 40 mm / s speed, maintain any time and observe the test result, t The battery does not explode, not fire is qualified.

Structure: One machine structure, the door uses explosion-proof lock + explosion-proof chain

Use Environment: System power supply three-phase power supply:AC380V±10%/50Hz 3KW.

Technical Parameters

Control and Operation	PLC touch intelligent control system, remote control device.
Dimensions	Inner box WDH=500×300×300mm,304 stainless steel Outer box WDH=940×780×1620mm,A3 Cold rolled steel plate paint, thickness 1.0mm Visual window WH=390×360,20mm Tempered explosion-proof glass + protective steel network double-layer protection
Drive mode	Hydraulic pressure
Unit conversion	Kg/N/Lb
Max. pressure	1KN-20KN Adjustable, customized according to requirements
Piston diameter	32mm
Crush/Nail Penetration Range	0~200MM
Crush Accuracy	±1%
Nail Penetration Test speed	0-40mm/s(adjustable)
Battery Extrusion Head	Standard Extrusion Head, Area ≥ 20cm2
Crushing Time Maintaining	0~99hours59minutes59seconds
Steel Needle	φ5mm～φ8mm High temperature steel needle,Length 100mm(Specified).
USB USB Interface	With USB interface, test data can be exported
Accessibility	Explosion-proof pressure relief device, smoke exhaust device, explosion-proof chain
Purchase piece	Temperature capture, voltage collection system, video surveillance system

Sinuo Testing Equipment Co., Limited established in 2019, but Sinuo has rich experience in manufacturing test euipment, test system and offering overall laboratory construction of electronic and electrical products. Sinuo's main products include electrical vehicle test equipment, battery testing equipment,  electromagnetic compatibility (EMC) test system, environmental testing equipment, fire retardant test equipment, dust-proof waterproof testing equipment and electrical appliances testing equipment. Our products covering electrical vehicle, electric power, communication, electrical appliances and electronic devices industries.

Sinuo has a professional technical research and development team, which is proficient in various international standards such AS IEC, ISO, EN, VDE, BS, AS, ASTM, GB and industry standards such AS MBN LV124, VW-80000. We master physical mechanics, heat, electricity, fluid and other theoretical knowledge in the application of equipment. And continue to focus on industry standard equipment performance optimization, operation simplification and equipment stability and reliability improvement.

Sinuo has two factories in Guangzhou and Dongguan, and cooperates with many research institutions and schools. Our R&D and production capacity are in the forefront. We have authorized agents in South Korea, the United States, South Africa, Egypt, Pakistan, the Philippines and other places, we serve customers BV, CSA, Intertek, SGS, TUV and other internationally renowned testing and certification institutions, local government quality inspection departments and production factories.