JN5179/001Z JN5179 Wireless RF Microcontroller IC MCU Philip Semiconductors

JN5179/001Z JN5179 Wireless RF Microcontroller IC MCU Philip Semiconductors IC

Applications:

 Robust and secure low-power wireless applications
 ZigBee 3.0
 Commercial Building and Home Automation
 Smart Lighting networks
 Internet of Things (IoT)
 Toys and gaming peripherals
 Energy harvesting, for example self-powered light switch

Summary of Features

The JN517x series is a range of ultra low power, high performance wireless microcontrollers suitable for ZigBee applications to facilitate the development of Smart Home and Smart Lighting applications. It features a high-performance and low-power ARM Cortex-M3 processor with debug with programmable clock speeds. The JN517x devices are available in JN5174, JN5178 and JN5179 variants, respectively having 160 kB, 256 kB and 512 kB of embedded Flash memory as well as 32 kB of RAM and 4 kB of EEPROM. The embedded Flash can support “Over-The-Air” code download of software stacks. Ro transmit power is configurable up to +10 dBm output. The very-low receive operating current (down to 12.7 mA and with a 0.6 A sleep timer mode) gives excellent battery life allowing operation direct from a coin cell. The JN517x also includes a 2.4 GHz “IEEE802.15.4 compliant” transceiver and a comprehensive mix of analog and digital peripherals. The JN517x is ideal for battery-operated applications supported through the comprehensive power-saving modes available in the device. The on-chip peripherals, which include a fail-safe I2C-bus, SPI-bus ports (both master and slave), and a six-channel analog-digital converter with internal temperature sensor support a wide range of applications directly without extra hardware.

Product Technical Specifications

Features:

 Very low current solution for long battery life: over 10 years
 Very low receive current for low standby power of receiver always on nodes
 Integrated power amplifier for long range and robust communication
 Large embedded Flash memory to enable Over-The-Air (OTA) firmware updates without external Flash memory
 Single chip device to run communication stack and application
 Supports multiple network stacks
 Peripherals customized for lighting applications
 System BOM is low in component count and cost
 Flexible sensor interfacing
 Package
 6*6 mm HVQFN40, 0.5 mm pitch
 lead-free and RoHS compliant

2.2 Ro features
 2.4 GHz IEEE802.15.4 compliant Ref. 1
 Receive current 14.8 mA, in low-power receive mode 12.7 mA
 Receiver sensitivity 96 dBm
 Configurable transmit power, for reduced current consumption, for example:
 10 dBm, 22.5 mA
 8.5 dBm, 19.6 mA
 3 dBm, 14 mA
 Ro link budget 106 dB
 Maximum input level of +10 dBm
 Compensation for temperature drift of crystal oscillator frequency
 2.0 V to 3.6 V battery operation
 Antenna diversity (Auto RX)
 Integrated ultra-low-power sleep oscillator (0.6 A)
 100 nA deep sleep current with wake-up from external event
 128-bit AES security processor
 MAC accelerator with packet formatting, CRCs, address check, auto-acks, timers
2.3 Microcontroller features
 ARM Cortex-M3 CPU with debug support
 JN5174: 160 kB/32 kB/4 kB (Flash/RAM/EEPROM)
 JN5178: 256 kB/32 kB/4 kB (Flash/RAM/EEPROM)
 JN5179: 512 kB/32 kB/4 kB (Flash/RAM/EEPROM)
 OTA firmware upgrade capability
 32 MHz clock selectable down to 1 MHz for low-power operation
 Dual PAN ID support
 Fail-safe I2C-bus interface. operates as either master or slave
 8 Timers (6 PWM and 2 timer/counters)
 2 low-power sleep counters
 2 UART, one with flow control
 SPI-bus master and slave port, 2 simultaneous selects
 Variable instruction width for high coding efficiency
 Multi-stage instruction pipeline
 Data EEPROM with guaranteed 100 k write operations
 Supply voltage monitor with 8 programmable thresholds
 Battery voltage and temperature sensors
 6-input 10-bit ADC
 Analog comparator
 Digital monitor for ADC
 Watchdog timer and POR
 Low-power modes controller
 Up to 18 Digital IO (DIO) and 2 digital outputs pins

More related Semiconductor:

JN5179-001-M16Z
JN5179/001Y
JN5179/001Z
JN5179/001K
JN5179-001-M13
JN5179-001-M16
JN5179-001-M10Z
JN5179-001-M16534
JN5179-001-M10534
JN5179-001-M13534
JN5179-001-M13Z
JN517X-XK030598
JN5179/001
JN5179-001-M10
JN517X-DK005Z
OM15021Z
JN517X-XK040UL

Angel Technology Electronics Co Was Founded In HongKong Since 2006, Our branch Located In The Silicon Valley Of China, Shenzhen.Angel Technology provide one stop service for electronic components,PCB and PCB Assembly(SMT).

The Mission Of  Angel Technology Electronics Co has always been to provide Quality Electronics Components To Manufacturers Worldwide.Angel-tech's vision is become the excellent electronic components supplier with the highest satisfaction between employees and customers. Early On We became the Primary channel for project closures And Inventory build-ups for Major Distributors such as Arrow Electronics and Contract Manufacturers. Angel Technology Electronics Co Has since then added Sourcing Of High Quality Components From Local Manufacturers In China.

The corporate Philosophy Policy of  Angel Technology Electronics Co is Innovation,Not limited by the inhereent thinking,always looking for new ways to meet the needs of the market.So We have specialized in providing customers with one-stop service of electronic components, PCB and SMT since 2006, helping end customers to efficiently complete the full project including BOM list procurement process etc.

Angel Technology Electronics Co Has always been Customer Driven Rather than Opportunity Driven. Meaning- Angel Tech Will Always Choose Path That is the best For Long Term Relationship With Customer Over Short Term View. It Is Why We Have One Of The Highest Customer Retention Scores Of China Based Distributors.

Prioritizes client satisfaction:

Because of our clients are at the heart of how we work,At Angel Technology Electronic Co, our goal is to provide customers with electronic components supply,PCB production, SMT assembly one-stop service.

IInnovation and creativity:
We believe that innovation is fundamental to our success and we take particular pride in regularly working closely with industry innovators and our clients to set new standards. In recent years, Angel Technology Electronics co have also started collaborating with more and more corporations to explore new technologies in smart home and PMIC.

Inventory management:
Angel Technology Electronics co provides a third-party warehousing and professional IT inventory management software for customers to achieve seamless docking. The ownership of parts can only be transferred when the customer uses parts.

Angel Technology Electronic's incoming parts have undergone rigorous inspection, and the products are stored in standard anti-static, anti-humidity, anti-high temperature, and the stock are regularly tested to make the parts safe.

Packaging transportation standard :
The parts are tested for performance during shipment, and the packaging must be waterproof, moisture-proof and shock-proof. At the same time, Angel Technology Electronics cooperates with a number of international first-class freight companies to ensure that the parts of first- and second-tier cities can be delivered at that day, and arrive the next day. The goods of third-tier cities and remote areas can be delivered at that day and arrive within two days to ensure that customer.

Angel Technology Electronics Co have been passionated about electronic components distribute and integrated solution provider since 2006. We are also a PCBA manufacturer with our own manufacotry who can better serve for customers of smart home, communication, industry, automotive electronics and medical electronics etc.