Ccmt060204 Ccmt09t304 Tungsten Carbide Lathe Insert Turning Cnc Precision Cutting

Quick Detail:

• German technology
• Sharp and wear-resistant
• Smooth chip removal
• Stable performance
• Strong universality

Description:

• CCMT carbide lathe insert is made of ultra-fine cemented carbide raw material, finely ground and sintered at high temperature, so that the blade has high hardness, good toughness and high temperature resistance, so that the wear resistance of the rear face of the blade is stronger, the overall impact resistance is strong, and the blade is not easy to collapse; The blade is sharp, the four corners are available, the chip breaking and chip removal are smooth, and the processing efficiency is improved; The supply of goods is sufficient and the models are complete, so that you can use them at ease without worrying about out of stock.

Specifications:​

Lead Time:

Notice:

• The tungsten carbide lathe insert shall not be collided or dropped on the ground and must be handled with care.
• Before installing the carbide lathe insert, the performance and purpose of the saw table must be confirmed to ensure that the cutting direction indicated by the blade arrow is consistent with the rotation direction of the saw table. It is strictly prohibited to install in the opposite direction. Wrong installation direction may cause the blade sawtooth to fall off, so as to prevent accidents.
• After installation, it is necessary to confirm whether the central hole of the carbide lathe insert is firmly fixed on the flange plate of the saw table. If there is a gasket, the gasket must be sleeved; Then, gently push with your hand to confirm whether the blade rotates eccentrically.
• When using, do not exceed the specified high speed
• When the tungsten carbide lathe insert is not used, hang the blade vertically on the dry shelf.

Applications:

Our tungsten carbide lathe insert could to be processed Alloy steel, Tool steel, carbon steel, stainless steel, Cast iron and Titanium alloy. Working material as following: