11 - 75 KW Sinking Winch Of Conveying Hoisting Machine For Mining

11-75 KW Sinking Winch Of Conveying Hoisting Machine For Mining

1. Features of sinking winch conveying hoisting machine:

The static tension difference is large, the lifting load changes greatly, the lifting speed changes greatly during the sinking, the speed diagram is complex, which is at least nine stages of the speed diagram, which requires the lifting machine to have higher control precision and better speed performance; After the well sinking winch needs to be transported to other places for drilling, requiring compact structure, light weight, easy disassembly and handling, disassembly parts have enough stiffness, easy to install again.

2. Conveying hoisting machine Sinking winch usage:

JZ series sinking winch is mainly used for hoisting hoisting equipment and tensioning rope, such as hanging tray, water pump, water pipe, grouting pipe, air duct, etc. when digging shaft of coal mine, metal mine and non-metal mine. The winch is mainly used to replace the tail rope connected between the two cages of the hoist; And in exchange for the best flat rope, can also be used as a shaft winch, its performance is the same as the shaft.

3. Conveying hoisting machine Sinking winch parameters:

4. Product Series of sinking winch conveying hoisting machine :

(1) Single barrel JKZ sinking winch

(2) double barrel 2JKZ sinking winch

5. Folding winch lubrication of sinking winch conveying hoisting machine

(1) The reducer shall be lubricated with winter HL-20 gear oil or HG-24 saturated cylinder oil, and its oil surface shall ensure that the worm is fully immersed in oil. The reducer is used once a year to change the oil.

(2) The bearing of the spindle and the bearing of the output shaft end of the reducer should be replaced regularly or supplemented with No. 4 calcium-based grease, and the oil should be changed once every two years.

(3) Lubricating oil should be added to the open gear before each start.

(4) The remaining parts to be lubricated should be lubricated before each start, especially the thrust ring between the two gears on the output shaft of the reducer and the shaft sleeve of the movable gear should be lubricated.

Luoyang Zhongtai Industries Co., Ltd. The company was founded in 1981 and finished joint stock reform in 2005. There are eight subsidiaries and it's an independent legal entity with the qualifications of operating import & export trade.

With a garden-like industrial park and modern standard plant covering 80,000 square meters, ZTIC possesses advanced equipments, technologies and detecting methods. After more than 30 years development, the company has developed into a collectivized one with product designing, manufacture, installation and technical services as a whole. The products comprise all the equipments used in mining, cement, metallurgy, construction as well as the related accessories with high power reducer and large-sized castings & forgings, etc.

ZTIC has acquired ISO 9001:2008 Certification of conformity of Management System Certification, Mine Product Safety Authentication, Recognition for BV Mode Ⅱ Survey Scheme in France, Mining Electrical Equipment KY Certification, etc.
The company has also acquired "Fully Quality Management Achievement Award", "Top 50 Enterprises", "Henan Outstanding Innovative Enterprise” and “The Most Powerful Enterprises of Henan" in 2010.

Quality product performance and good reputation, our products have been exported to mnay countries and regions in the world, including: Russia, Serbia, Australia, Mongolia, Indonesia, Bangladesh and other countries, the products are subject to a great welcome and praise.