1800 Rpm Oven PWM BLDC Motor FG Signal 12V DC With Controller

BLDC Motor For Oven Fan Use PWM Control FG Signal 12VDC With Driver And Controller

• Operating condition

• Motor electric characteristics

• Motor driver and controller

The motor drive is DC chord vector control, and its characteristics are shown in the following table:

Input voltage	100-255VAC
Input power	20W
Output voltage	12VDC
Output power	18W max
Control method	PWM input
Position detection method	FOC
PWM signal	PWM frequency range: 15-28KHz Duty cycle range: 1%~99% L level: 0-1.0V; H level: 2-5.5V
FG signal
Soft start function	After the controller is powered on, the motor is slowly accelerated to the required value after starting.
Locked rotor protection	When the load brought by the motor encounters great resistance from the outside to stop the motor, the controller temporarily stops the motor. After a few seconds, the motor tries to start. If the resistance is absent, the motor runs normally. If the resistance is still present, the motor stops temporarily again. After several cycles, the motor stops. Manually remove the resistance, and press again to start the motor.
Over current protection	If the motor current suddenly increases beyond the set value due to external factors, the motor will stop running.
Open phase protection	When one or two of the three phases of the motor are not energized, the motor stops running.

Drawing:

Application: smart home appliances, like oven, mircowave oven.

Founded in year 2009, ZHAOLI MOTOR is a private tech enterprise professional in developing,designing and producing different kinds of motors including shaded pole motor, capacitor motor, brushless DC motor, air compressor and cross flow fans. Since establishment, being a customer-oriented company, we are in good faith to provide dedicated service and products with good quality and reasonable price for our customers.

At present, Zhaoli motor has three factories. Headquarter is in Zhongshan,other two branch factoris are in Shenzhen and Wuhu, Anhui Province. Totally we have more than 2200 workers, 70 production lines which are equipped with advanced automated production equipments. We have strong manufacturing ability. We do our own stamping, die-casting, shaft processing; The motor main parts are all produced by ourselves. We are increasing rapidly. Now our monthly production capacity is 9 million pcs products.

We attach great importance to technology investment and innovation. In recent 3 years, every year we invested at least 12 million RMB into new projects and lab equipments. Also we have a group of technical and quality personnel with over 10 years' experience.

Over the years, by virtue of good reputation, high quality, reasonable price and punctual delivery, not only we establish good, stable and long term partnerships with our customers, but also win the favor of customers worldwide.