| Sign In | Join Free | My entremaqueros.com |
|
| Sign In | Join Free | My entremaqueros.com |
|
| Categories | Alumina Ceramic Components |
|---|---|
| Brand Name: | Antaeus |
| Model Number: | AD-A031 |
| Certification: | / |
| Place of Origin: | Hunan,China |
| MOQ: | Negotiation |
| Price: | Negotiation |
| Payment Terms: | T/T or Negotiation |
| Supply Ability: | Full Supply |
| Delivery Time: | 15-45 days |
| Packaging Details: | Inner vacuum packaging, outside carton. |
| Chemical ingredients: | Al2O3 |
| Max. Use Temp.: | 1650℃ |
| Bulk Density: | 3.6g/cm3-3.9g/cm3 |
| Water absorption: | 0% |
| ROHS Hardness: | ≥85 |
| Flexural strength: | 358(52) - 550 Mpa(psix10^3) |
| Compressive Strength: | 2068(300) - 2600(377) Mpa(psix10^3) |
| Coefficient of thermal expansion: | 7.6 - 8.2 / 1X10^-6/℃ |
| Coefficient of thermal conductivity: | 16-30.4 / W/m.K |
| Thermal Shock Resistance: | 250℃ |
| Dielectricity constant: | 9-9.7 / 1MHz.25℃ |
| Dielectric strength: | 8.3(210) - 8.7(220) / ac-kV/mm(ac V/mil) |
| Volume Resistivity: | >10^13 ohm-cm |
| Company Info. |
| Loudi Antaeus Electronic Ceramic Co.,Ltd. |
| Verified Supplier |
| View Contact Details |
| Product List |
Alumina ceramic components / relay ceramic assemblies / ceramic - metal brazed contactor
1. Description:
1) Tighter tolerances cost more during manufacturing. Geometric tolerances may look nice on the drawing, but if they are not necessary, they will cost more during manufacturing as well as during inspection.
2) Even though it is easier to hold tighter tolerances on small parts, small I.D.s can cause excessive tool breakage.
3) Wall thickness should be kept to approximately 10% of O.D. or a minimum of .020 when possible.
4) This includes the distance between the holes, as well as the distance from the I.D. to the O.D.
5) Depth of blind holes should not be greater than 50% of the overall length.
6) There should be as few steps or levels as possible in your new design.
7) Multiple levels cause areas of compaction that may result in changes in green press density.
8)These changes in density may cause the fired part to be porous, resulting in shrinkage differences that can affect the dimensional stability.
2. Feature Advantages:
1) Good wear resistance
2) High Fracture toughness
3) Good insulation performance
4) High temperature resistance
5) A variety of specifications is available
6) Satisfy various technical requests
3. Material Features / Properties:
| Color | White or Ivory | White or Ivory | White or Ivory | |
| Density | g/cm 3 | 3.82 | 3.9 | 3.92 |
| Hardness | HRA | 83 | 85 | 85 |
| Flexural Strength | Mpa (psi*10 3 ) | 375 | 386 | 381 |
4. Technical Parameters:
| Technical Parameters of Ceramics | ||||||||
| Items | Test Conditions | Unit or Symbol | 99% AL2O3 | 95% AL2O3 | 90% AL2O3 | Zirconia | Steatite | Silicon Carbide |
| Volume Density | -- | g/cm3 | ≥3.70 | ≥3.62 | ≥3.40 | ≥5.90 | ≥2.60 | ≥3.08 |
| Tightness | -- | Pa·m³/s | ≤1.0×10-11 | ≤1.0×10-11 | ≤1.0×10-11 | - | - | - |
| Liquid Permeability | -- | -- | Pass | Pass | Pass | Pass | - | |
| Flexural Strength | - | MPa | ≥300 | ≥280 | ≥230 | ≥1100 | ≥120 | ≥400 |
| Elastic Modulus | - | GPa | - | ≥280 | ≥250 | ≥220 | - | 400 |
| Poisson Ratio | - | - | - | 0.20～0.25 | 0.20～0.25 | - | - | - |
| Thermal Shock Resistance | 800℃( Room Temperature) Cycle: 10 times | Pass | Pass | Pass | - | - | - | |
| Coefficient of Linear Expansion | 20℃～100℃ | ×10-6 K-1 | - | - | - | ≤8 | - | |
| 20℃～500℃ | ×10-6 K-1 | 6.5～7.5 | 6.5～7.5 | 6.5～7.5 | 6.5～11.2 | - | - | |
| 20℃～800℃ | ×10-6 K-1 | 6.5～8.0 | 6.5～8.0 | 6.3～7.3 | - | 4 | ||
| 20℃～1200℃ | ×10-6 K-1 | - | 7.0～8.5 | - | - | - | - | |
| Coefficient of Thermal Conductivity | 20℃ | W/(m·k) | - | - | - | - | - | 90～110 |
| 1000℃ | ||||||||
| Dielectric Constant | 1MHz 20℃ | - | 9.0～10.5 | 9.0～10 | 9.0～10 | - | ≤7.5 | - |
| 1MHz 50℃ | - | - | 9.0～10 | - | - | - | - | |
| 10GHz 20℃ | - | 9.0～10.5 | 9.0～10 | 9.0～10 | - | - | - | |
| Volume Resistivity | 100℃ | Ω·cm | ≥1.0×1013 | ≥1.0×1013 | ≥1.0×1013 | - | ≥1.0×1012 | - |
| 300℃ | ≥1.0×1013 | ≥1.0×1010 | ≥1.0×1013 | - | - | - | ||
| 500℃ | ≥1.0×109 | ≥1.0×108 | -- | - | - | - | ||
| Disruptive Strength | D.C | kV/mm | ≥17 | ≥15 | ≥15 | - | ≥20 | - |
| Chemical Durability | 1:9HCl | mg/c㎡ | ≤0.7 | ≤7.0 | - | - | - | - |
| 10%NaOH | mg/c㎡ | ≤0.1 | ≤0.2 | - | -- | - | - | |
| Grain Size | - | μm | - | 3~12 | - | - | - | - |
5. Process Flows:
Formulating --- Granulating --- Forming --- Sintering --- Grinding --- Inspecting --- Packing
6. Application Fields:
New energy vehicles, charging piles, solar power generation, energy storage and power storage system, electric vehicle power system and so on.
7. Production Facilities: Prilling Tower , Forming Machine , High Temperature Sintering Kiln
8. Detection Devices:
Electric Performance Tester , Film Thickness Analyzer , Granulometer , Helium Mass Spectrometer Leak Detector , Universal Pull Force Meter
9. Order Flow Steps as belows: Inquiry ---Quotation --- Place an order --- Production --- Delivery
10. Our advantages: Quality Assurance ; Price Competitive ; Factory Supply Directly ; Good Service
11. Shipping and Package:
12. Our aimed market:
Notes:Above information only for reference and please contact with us for more details freely when you have any inquiry!
|
High Fracture Toughness 99% Al2O3 Ceramic Products for Machinery
Low Thermal Conductivity 99 Al2O3 Ceramic Components For Power Lines
High Precision 3.6g/cm3 - 3.9g/cm3 Alumina Ceramic Components
99 Percent Al2O3 Alumina Ceramic Parts With High Fracture Toughness
Impact Resistant 99% Al2O3 Alumina Ceramic Components
High Compressive Strength 99 Al2O3 Alumina Ceramic Parts
Vacuum Tight Non Porous 99.5% Alumina Ceramic Components
IATF16949 Anti Corrosion 99 Percent Alumina Ceramic Products
Alkali Resistant 99% Alumina Ceramic Components
99% 99.5% 99.8% Al2O3 Alumina Ceramic Products HRA83 HRA85
