10GBASE-ER/OC-192 40km 1550nm 10G SFP+ Module Juniper Compatible

10GBASE-ER/OC-192 40km 1550nm 10G SFP+ Module Juniper Compatible

10GBASE-ER/OC-192 SFP+ Transceiver 10Gb/s 40km, 1550nm Juniper Compatible

Product Features

• Duplex LC fiber connectors
• IEEE 802.3ae 10GBASE-ER/EW
• SDH STM-64 ITU-T G.959.1 S-64.2b
• Full Digital Optical Monitoring
• Metal enclosure for lower EMI
• Compliant with SFP+ Electrical MSA SFF8431
• Compliant with SFP+ Mechanical MSA SFF-8432
• Laser Class 1 IEC/CDRH compliant

Electrical Characteristics (TOP(C) = 0 to 70 ℃, TOP(I) =-40 to 85 ℃,VCC = 3.13 to 3.47 V)

Note:

1. Connected directly to TX data input pins. AC coupling from pins into laser driver IC.

2. Into 100Ω differential termination.

3. 20 – 80%. Measured with Module Compliance Test Board and OMA test pattern. Use of four 1’s and four 0’s sequence in the PRBS 9 is an acceptable alternative.

4. LOS is an open collector output. Should be pulled up with 4.7kΩ – 10kΩ on the host board. Normal operation is logic 0; loss of signal is logic 1.

Optical Characteristics (TOP(C) = 0 to 70 ℃, TOP(I) =-40 to 85 ℃,VCC = 3.13 to 3.47 V)

Notes:

1. Measured with worst ER=5dB

2. PRBS 2^{31 – 1} and BER<10^-12.

Digital Diagnostic Specifications

The OLSP551XL-C(I)D40 transceivers can be used in host systems that require either internally or externally calibrated digital diagnostics.

Notes:

1.When Operating temp.=0~70 ºC,the range will be min=-5,Max=+75

2. Internally measured

3. The accuracy of the Tx bias current is 10% of the actual current from the laser driver to the laser

Product Descriptions

Olinkcom’s OLSP551XL-CD40 is a Juniper Compatible Duplex 10GBASE-ER/EW Ethernet 10G Ethernet / 8G FC SFP+ transceiver designed for long distance optical communications up to 40 km with signaling rates up to 10Gbps. All Olinkcom’s SFP+ s are ROHS compliant, allow for real-time diagnostic monitoring as per SFF-8472 and designed to meet Multi-Source Agreement (MSA) standards for Duplex transceivers with LC interface.

Applications

• 10 Gigabit Ethernet
• Fibre Channel 8x
• Fibre Channel 4x
• 10GBASE-ER @ 10.31Gbps

Compatibility

Olinkcom's Juniper Compatible 10GBASE-ER SFP+ transceiver can be worked with the below Juniper networks equipment.

Shenzhen Olinkcom Technology Co.,Ltd established in the year of 2011, is a professional manufacturer of optical transceivers. We are dedicated to designing, developing, production and distributing optical transceivers to fulfill customer’s requirements for optical communication. Olink is able to offer a vast range of optical modules from 155Mbps ~ 100Gbps, including CFP2, QSFP+, XFP, SFP+, SFP, PON and CWDM, DWDM solutions, to support various protocols and meet with different requirements on Fiber Channel, Ethernet, SONET/SDH, FTTx, Data Center etc. And all product quality is backed by our strong R&D ability, rigorous quality control procedure and rich production experience. Our modules are exported to China domestic market, Asia, Southeast Asia, Europe and the American market, etc.

With the concept of “Quality First, Service Oriented, Realistic and Innovative, Continuous Improvement”, Olink keeps developing and optimizing product design solutions, to provide our valued customers with the most cost efficient product and service, as well as some customized products.