Feeding unit

• Light type Lead edge feeder with vacuum suction, wind is adjustable depend on sheet, make sure feed sheet smoothly.
• Main motor with start protecting device, machine cannot run when machine units aren’t lock.
• Continuous or skip feeding available
• Double feed rollers wrapped with rubber, with groove prevent overpressure, reduce pressed sheet
• Left-right baffle adjusted by computer with automatic flap, back baffle adjusted by motorized, front baffle manual synchronous adjust.
• Dust clearance bush and fan to clean dust on board. Air outlet can be adjusted as per sheet size
• Machine units move by motorized and move with alarm belling to make sure safety.

printing unit

• Fast change printing plate, with footstep to control cylinder rotate clockwise or anticlockwise
• Feed roller, press roller, rubber roller, anilox roller gap adjust with self-lock part
• Printing phase adjusted by PLC in 360degree with digital input, do when machine running or stop
• Pneumatic brake device to keep printing register fixed, when units separate or clean, brake limit gear rotate, keep original gear position.
• Pneumatic lift anilox roller for ink, motorized ink will no dry.
• Printing cylinder made of seamless steel pipe, be grinded with chrome plated, do balance treatment, running smooth and steady.
• Lift-down design( when feed sheets anilox roller down in order, stop sheet lift rollers in order)
• Double diagram pump ink, recycle automatically, clean with water
• Memory function, after clean plate it back to original position
• Printing precision: +-0.5mm
• Printing cylinder horizontal move by motorized
• Steel anilox roller from Haili brand (option: ceramic roller with doctor blade)

slotting unit

• Box height adjusted by motorized.
• Slotting phase adjusted by PLC in 360 degree with digital input, do when machine running or stop.
• Slotting die and crease die move together by motorized
• Crease gap and knife gap adjusted by self-lock mechanism
• Collison protection on slotting knife for height adjust and move, don’t damage machine
• Collison protection for slotting die horizontal move (electronical)
• Slotting knife width 7mm, good quality material, with hot-treatment and grinded, teeth knife, double-piece trim knife, sharpen and precision.