SS Cover Dust Proof USB Available Shovel Wheel Loader Indicator

Specifications of Position Sensor

1. HALL Type Proximity Switches
2. Operating Voltage: DC5~24V.
3. Detecting Distance: 1~8mm.
4. Response Frequency: 5KHz.
5. Quiescent Current:Max. 2mA.
6. Thread Size: M8×1mm.
7. Service Temperature: -25℃~+70℃.
8. Protection Level: IP67.

Standard Detecting Target

1. Permanent magnet.
2. Outline Size: 30×10×5mm [L×W×T].

Specifications of Oil Pressure Sensor

• Operating Voltage: DC5V.
• Capacity: 0~25MPa.
• Accuracy: ±0.1%FS.
• Output Sensitivity: 2mV/V.
• Zero Drift: ±0.015%FS/℃.
• Safe Overload: 120%FS.
• Thread Size: M10×1mm.
• Service Temperature: -40℃~+125℃.
• Protection Level: IP67.

System Accuracy

• Accuracy Grade: III.
• Verification Accuracy of Weighing Indicator: 0.02%.
• Accuracy of Single-Bucket-Weight: 0.5%~1.0%.
• Accuracy of Totalized Loading Weight: 1.0%.

What product does the whole set include?

1. 1 Weighing indicator with Built-in thermal printer.
2. 1 Position sensor.
3. 2 Oil pressure sensors.
4. 2 Plate type three-way joints.
5. 1 Mounting fitting.

Operating Principle
 Wheel Loader Weigher is a dynamic weighing and auto-totalizing equipment installed on wheel loader.
 When the lift-arm of wheel loader lifted to a certain height, the position sensor will trigger the weighing process, and the weighing indicator will collect the oil pressure signal from lower and upper oil chambers of arm-lifting oil cylinder. After signal processing and compensating, Single-bucket-loading -weight will be got and totalized to Totalized Loading Weight automatically. The operator can judge if the present Single-bucket-loading-weight is valid according to the alarm messages, and confirm the last bucket’s loading weight according to the negative deviation value.
System Configuration
 1 Weighing indicator with thermal printer.
 1 Position sensor.
 2 Oil pressure sensors.
 2 Plate type three-way joints.

Shovel Loader Weigher With High Sampling Frequency 400Hz Weighing System, Wheel Loader Scales

BST106-N59[B] Suitable for the wheel loader series with loading capacity 1~12t.

NEW Shovel Loader Weighing Controller BST106-N59[B] is with metal oil pressure sensor pipe and metal position sensor pipe. It can be extend its service life effectively. There are some point need to be paid attention to when making order:

1. If you need longer pipe, pls tell us exact length when making order;

2. If the three-way joint of your loader is special, please tell us the model number the loader you want o install or please send us the detail information of theree-way jointyou need;

3. Standard configuration is with built-in printer, if you want to connect a printer externally, that is ok, just tell us when making order please.

Mode Of Delivery:

 EMC design with high anti-jam for industrial environment.
 DC24V power input with reverse polarity protection.
 32-bit ARM CPU with 72MHz & higher arithmetic speed.
 Dust-proof stainless steel shell with protection level IP65.
 640×480 TFT display screen with English display and input.
 24-bit Σ-△ADC with internal resolution 1/1,000,000.
 High sampling frequency 400Hz.
 Special Anti-vibration Digital Filtering Algorithm for precise weighing, stable display and rapid response.
 Special Acceleration Compensation Algorithm.
 10000 Loading Records can be saved.
 Each record can contain 50 Single-bucket-loading-weight.
System Accuracy
 Accuracy Grade: III.
 Verification Accuracy of Weighing Indicator: 0.02%.
 Accuracy of Single-Bucket-Weight: 0.5%~1.0%.
 Accuracy of Totalized Loading Weight: 1.0%.

Changsha SUPMETER Technological Co., Ltd., as a council member of China Weighing Instrument Association (CWIA), is a high-tech enterprise which specializes in designing and manufacturing weighing/batching controller, force measuring controller, explosion-proof controller and related system software.

Since founded in 2004, SUPMETER is persisting in doing the same thing of ‘customizing satisfied products for you and building win-win cooperation with you’ and insisting on the core idea of ‘Being Super in Meter and Being Perfect in Service’. On the quality basic of ‘Accurate Weighing, Quick and Steady Control, Standard Communication Bus and Protocol, Suitable for Industrial Environment’, SUPMETER is doing the best to meet your individual requirements and to reach the enterprise goal of ‘Outstanding Quality, Continuous Improvement, Effective Service and Customer Satisfaction’.

The products of SUPMETER have been sold to over 1000 weighing equipment manufacturers from China, Germany, USA, Canada, Australia, Russia, Ukraine, Uzbekistan, Turkey, Pakistan, India, Thailand, Vietnam, Philippines, Malaysia, Indonesia, Singapore, Sri Lanka, South Africa, Nigeria, Zimbabwe, Iran, Saudi Arabia, Jordan, United Arab Emirates, Oman, Palestine, Mexico, Brazil, Argentina, Venezuela, Honduras, Bolivia, Chile, Peru and other countries and regions. And we have built long-time relationship of technical exchange and co-development with many famous enterprises. By tracking and applying international advanced technology and combining with all kinds of typical applications from the worldwide customers, SUPMETER has developed multiple high-quality products for customers and became a famous enterprise and brand in weighing, batching and force measuring field.

We will do our best to make our development more high-efficiency, quality more superior, service more enthusiastic and price more reasonable. SUPMETER, as your faithful team of product-development and technical service, is one of your best choices.

Executing Standard & Product Certification:

• GB/T 7724-2008《Electronic Weighing Meter》PRC National Standard.
• GB/T 7724-2008《Electronic Weighing Meter》PRC National Standard.
• OMIL R76: 2006《Non-automatic Weighing Instruments》International Recommendation.
• OMIL R50: 1997《Continuous Totalizing Automatic Weighing Instruments》.
• PRC Approval Certificate No. PA2006F108-43, PA2014F108-43.
• CE Certification No. CPC16/042377, CPC16/042376.