Steel Rack Roll Forming Machine , Angle Roll Forming Machine With Servo Feed In

Steel rack slot angle roll forming machine with high precision servo feed in

Brief Introduction of Strut Channel Roll Forming Machine:

The strut channel roll forming machine is the equipment that manufactures strut from galvanized steel of 1.5-2.5mm thickness.

In addition, one strut channel roll forming machine can technically produce 3 profiles by adjusting different spacers between rolling tools. As a matter of fact, the key parts in the line are punching unit, roll forming unit and cutting unit. However, the position and working method for punching and cutting unit may vary. Generally, there are two solutions for roll forming the channels, based on the line speed. Economical solution and automatic solution, below is the improved solutions

Quick Detail:

1. Thickness : 1.0-2.0mm
2. Material : GI/G350
3. Driven way: by driven motor
4. Cutting way: by hydraulic power pack
5. Cutting tolerance : ±1mm

Machine list:

1. Un-coiler with pre-leveling(2 in 1)
2. Professional lubrication device
3. Auto servo feed in device
4. Presser
5. Punching tools
6. Roll former
7. hydraulic cutting device
8. no power Rack
9. PLC control systems

Description/Technical Parameter details of complete line:

• 2 Tons Hydraulic Un-coiler with pre-leveling device

Hydraulic system to expand coil inner hole, four palms

Motorized driving coil rotation, auto stop/start control, 2.2KW

Load capacity=2Ton

Coil width: 200mm

Coil Inner-diameter: Φ510±30mm

• Professional Lubrication device

Equipped between the roller feeder and the press

Lubrication for punching tools and the roll former

• Auto Feed in Device

Strip width: Max. 200, thickness: 1.5-2.0mm

Servo motor: YASKAWA, 1.3KW

• Presser

Capacity: 80 tons

Chinese Brand: YANGLI

• Roll Forming machine

Wall plate frame design, thickness of wall plate is 18mm

18 stages to form

Rollers manufactured from Cr12, heat treatment

Shafts Diameter=ф75mm

Main motor =11KW

• Hydraulic cutting device

Stop to cut

After cut off, there are 8mm material waste

• PLC Control System

Siemens brand PLC and touch screen, Schneider brand Inverter, Omron encoder

Cut-to-length tolerance≤±1mm

Control Voltage 24V

• Run-out Rack

3 meters Length

No power

Profile Drawing/Layout/Equipment reference pictures:

NKH Machinery is an experienced manufacturer of a wide range of roll forming machines, such as panel/roofing tile /purlin /ridge cap /pipe/ metal deck lines/cut to length & recoiling lines/ crimping/curving machines/folding machines, etc.

Over 10 years of experience has allowed us to become aware of and to incorporate the best practices from around the World. It has allowed us to develop our company’s awareness of the importance of design, performance and quality standards in all aspect of the development and delivery of modern roll forming lines.

Excellence is our expectation. A consistent commitment to quality is something we maintain throughout every level of our organization and every individual within it. Whether working in parts or assembly, service or sales, each member of the NKH machinery team participates in the development process of each machine we create. We will meet your high standards by taking full advantage of the experience, creativity, and wisdom each member of our team has to offer. Our overall goal is to ensure the best possible outcome for you, assisting you in generating profits that are well-worth your investment with a NKH Machine.

We are ready to meet you anywhere in the world to discuss your roll forming requirements and you are welcomed to call Our Sales Team to take your initial enquiry.