Black Power Surge Protector Box Indicator Lamp With 220V System Voltage

Three phase power supply, lightning protection, surge protector, box type, lightning counter, indicator lamp

Brief introduction

The three phase power supply lightning protection box is used for lightning protection of 220/380V distribution system, so as to protect the equipment from damage caused by lightning overvoltage along the power line. It is mainly installed in distribution rooms, distribution cabinets, AC distribution panels, switchgear boxes and other important equipments, which are easily subject to lightning incoming power supply.

Working principle of product

n the normal working condition, the lightning protection module is in the disconnected state and does not affect the normal work. When the line has the impulse overvoltage at the moment when the lightning strikes, the lightning arrester module quickly passes through the very short time, short the overvoltage to the earth, and when the pulse overvoltage disappears, the lightning arrester module is resumed to disconnect. State, which does not affect the power supply of the user.

Product features

1. double power supply system, up and down access structure.

2. using the latest arc extinguishing technology to avoid fire completely

3. with the power status indicator, indicating the working state of the lightning protector.

Product specification

1. Rated Operating Voitage:385V

2. system voltage:220V

3. Working frequency (HZ): 40～60

4. Voltage protection level: 1.8KV

5. Maximum flow rate :40KA

6. response time: L-N 25NS N-PE

7. Protection mode: L-N/L,N-PE

8. Terminal terminal: Maximum 16mm²

Use of attention

1. the lightning protection box can be suspended on the wall or horizontally

2. after installation, close the automatic circuit breaker switch and check whether the working condition is normal

3. protector is applied to the lightning protection of the main power distribution system C level, and is installed on the incoming end of the main distribution cabinet, the distribution cabinet or the terminal electric cabinet in parallel.

Company profile

Thor is following the international quality system standards, is ISO 9001 certified and our technical standards are in line with GB18802.1-2011/IEC61643-1.
All types and classes of our lightning and surge arresters 20KA~200KA(8/20μS) and 15KA~50KA(10/350μS) are tested and pass all the requirements based on their class.

Thor is all about protecting against the damaging effects of power transients. It is our goal and mission to connect our customer challenges with high-quality, right-priced solutions and products – completed by unrivaled customer service and technical support.

Incorporated in 2006, Zhejiang Thor Electric Co., Ltd has built everything to offer a wide range of innovative and reliable surge protection solutions and products.

Thor is following the international quality system standards, is ISO 9001 certified and our technical standards are in line with GB18802.1-2011/IEC61643-1.

All types and classes of our lightning and surge arresters 20KA~200KA(8/20μS) and 15KA~50KA(10/350μS) are tested and pass all the requirements based on their class.

Thor has been designing new products to meet the RoHS directive since 2006. Thor’s ongoing commitment to RoHS compliance includes continuing efforts to reduce the presence of hazardous substances in the design and manufacture of a growing number of popular products.

Zhejiang Thor Electric Co., Ltd is committed to meeting the requirements of the European Union’s Waste Electrical and Electronic Equipment (WEEE) directive. This directive requires producers of electrical and electronic equipment to finance the take-back for re-use or recycling of their products placed on the EU market after 2005.