SC 2 RJ45 Fiber Optic Transceiver 850nm 1310nm 1550nm Single Mode 10 / 100m

10/100/1000M Ethernet media converter adopts switching technology to fulfill media conversion.

The traditional 10/100/1000M gigabit Ethernet can be extended to the distance of 60km through optical fiber link.

Keywords :

Media converter/ Ethernet media converter/ Fiber media converter/ 10/100M WDM Media Converter/ Fiber Optic

Media Converter/ WDM media converter/ optic fiber converter/ optical fiber converter/ fiber converter/ fiber optic

converter/ fiber optic equpiment/ fiber to ethernet

Features

Ø Supporting inter-conversion between 10/100/1000Base-TX and 1000Base-SX

Ø Supporting full-duplex and half-duplex and its auto-sensed

Ø Supporting automatic cross connection of twisted pair interfaces,

facilitating system commissioning and installation.

Ø Supporting the transmission of extra-long VLAN packets

Ø Supporting Quality of Service (QoS) and ensuring the transmission of VoIP packets;

Ø Supporting STP to form a redundant network

Key Features:

1. Auto negotiation function allows UTP ports to auto select 10/100/1000M and Full Duplex or Half Duplex.

2. The UTP port supports the connection of MDI/MDI-X auto crossover.

3. Singlemode Fiber: the max distance up to 60km

4. Supporting the max 1536 byte Ethernet packet

5. Supporting flow control

6. Adopting internal power supply

Technical Information:

1. Operating standards: IEEE802.3z/AB, 1000Base-T and 1000Base-SX/LX

2. Ambient temperature: 0 ~ +50°C Storage temperature: -20 ~ +70°C Humidity: 5% ~ 90%

3. Connector: UTP: RJ-45,10/100/1000Mbps; Fiber: SC,1000Mbps

4. Cable : UTP cable: Cat 5e or Cat 6 (the max distance up to 100m)

Fiber : singlemode : 8.3/125, 8.7/125, 9/125μm (distance 20-100km)

5. Flow control: Full Duplex: IEEE802.3x Half Duplex: back pressure

6. Power: DC 48V to DC 5V

7. MAC address table: 4K

8. Data Buffer: 256K