3m Range 4 - 20mA Fluid Level Meter Small Diameter Ultrasonic Sensor For Industrial Automation

3m Range 4-20mA / 0-10V Small Diameter Ultrasonic Sensor For Industrial Automation

Features

Non-contact
Teachable

Measuring window adjustable

Small unusable area

Introduction

Ultrasonic sensor measure is a reliability and outstanding versatility measurement method. It can realize to solve the most complex projects including object detection or level measure, because its measuring way works reliably under almost all conditions.

Appliactions

Level measuring

Mechanical engineering
Material handling

Food industry
Woodworking and furniture
Agriculture
Construction
Paper making

Dimensions

Parameters

General specifications

Indicators/operating means

Electrical specifications

Output

Ambient conditions

Mechanical specifications

LED Displays

Installation conditions

If the sensor is installed at the environment temperature fall below 0℃,It should do well on the protective measures. In case of direct mounting of the sensor in a through hole using the steel nuts, it has to be fixed at the middle of the housing thread.

Sensor Function Description

Set and adjust the switching point and advance interval of the switching output and analog output products

Switching and analog output can be set using the tuning end, specifically, there are eight working modes that can be set.

Each of these Settings is divided into the following steps:

In the first step, the user selects a self-set distance or puts the sensor into the wave-loss state.

Second, connect the calibration terminal to the power supply or GND, and keep the connection until the yellow light blinks (or the red light blinks if the state is lost).

In the third step, the user selects the second self-set distance or allows the sensor to enter the wave loss state.

In the fourth step, connect the calibration terminal to the GND or power supply (different state from the second step), and keep the connection until the yellow light blinks (or the red light blinks in the case of wave loss).

There are 8 modes of switching output

1. Window normally open mode (analog output products for positive linear working mode or distance measurement mode).

2. Window normally closed mode (analog output product is negative linear operation mode or liquid level measurement mode).

3. Single point normally on mode.

4. Single-point normally closed mode.

5. Single point normally open interval mode with large hysteresis loop.

6. Single-point normally closed interval mode with large hysteresis loop.

7. Whether the normally open mode is detected.

8. Whether the normally closed mode is detected.

About RS485 output model products. Description of

There are three modes of operation,

1: Automatic measurement mode, the sensor continuously measures the liquid level and distance, and the user reads the measurement results through the 485 interface at any time.

2: The user does not initiate a 485 communication, the sensor will actively initiate a measurement and report the result.

3: Sleep mode, the product goes into sleep mode, the user first wakes up the sensor through the 485 interface, and then initiates a measurement and obtains the results before the sensor sleeps again.

Click here to learn more

https://www.kacise.com/product/kus3000-m30-type1-series-ultrasonic-level-distance-sensor/?nowprocket=1

Xi'an Kacise Optronics Co.,Ltd. is a professional manufacturer of  measuring instruments , located in China xi’an City. Since 2008, Xi'an Kacise focused on the development and production of pressure, level and flow measuring instruments .

We have been specializing in manufacturing pressure, level and flow measuring instruments and related products for 10 years. Based on experienced technical and management personnel, through efforts of our entire staff, we have become a professional measuring instrument manufacturer and solution provider. And we are continuously trying to improve product quality.

Xi'an Kacise is qualified with ISO 9001-2008, GJB 9001B-2009, CE, intrinsic safety explosion-proof and isolated safety explosion-proof certificates, etc. which ensure that our products comply with international standards.

Kacise sensors have already been exported to America, Spain, Australia, Chile and 20 other countries and regions, and received many favorable feedbacks. Our overseas distributers are also increasing. We regard “reasonable prices, efficient production time and good after-sales service” as our tenet, and hope to cooperate with more customers for mutual development.

Our goal is simple: to sell the best products at the best prices, and provides industry-leading customer service. We personally get to know each of our customers, and we know how to discover the most valuable part of our business , to help others achieve their goals.