Sign In | Join Free | My entremaqueros.com
entremaqueros.com
Shanghai Duoke Energy TechnologyCo., Ltd
ICP Remarked Supplier
Home >

Organic waste gas processing complete sets of equipment system

Organic waste gas processing complete sets of equipment system

Country/Region china
Company Shanghai Duoke Energy TechnologyCo., Ltd
Categories Gas Liquid Separator
Update 2017-07-06 16:47:41
ICP License Issued by the Chinese Ministry
Contact Now

The main components of the selective catalytic reduction system include the catalyst, AdBlue injection device, AdBlue storage tank and AdBlue metering control device. The AdBlue injection is located in the engine downstream of the selective catalytic reduction system front end of the exhaust pipe, so that the heat of the exhaust gas into ammonia and carbon dioxide. When the nitrogen oxide and ammonia in the catalyst chemical reactions, the harmful nitrogen oxide molecules in the waste gas will be converted to harmless nitrogen molecules and water molecules.

To ensure the correct operation of the selective catalytic reduction system, we recommend that customers use high quality reagents such as AdBlue supplied by Air1. The quality difference of the reagent containing foreign pollutants, improve the risk of damage catalyst. Selective catalytic reduction techniques have been verified, consistent with existing and future regulations.

The organic waste gas treatment generally has the catalytic combustion method, the activated carbon adsorption desorption method, the direct combustion method and so on many methods. When the waste gas concentration is 1000mg/m, the outlet temperature is less than 45, the properties of the organic waste gas can be selected, and the adsorption and catalytic combustion desorption method is reasonable.

. Catalytic combustion and the ignition temperature is low due to is a kind of ideal through catalytic reaction (Wu Minghuo) processing method of organic pollutants, which has wide application range, simple structure, the advantages of high efficiency, energy saving, no secondary pollution, purification has at home and abroad widely used.

Shanghai Tongji Science and blue environmental protection equipment Engineering Co., Ltd. long-term commitment in development and application of organic waste gas collection and processing technology, has obtained two patents, technology development in different industries were successfully applied.

Absorption equipment

The absorption of VOCs was absorbed by low volatile or volatile solvent, and the difference of the physical properties of VOCs and absorbent was separated..

Containing VOCs gas self absorption at the bottom of the tower into the tower, in the rising process and from the top of absorber countercurrent contact, purified gas from the tower top discharge. Absorb absorbent of VOCs through the heat exchanger into the stripper top, at a temperature higher than the desorption and absorption temperature or pressure is lower than the absorption pressure conditions.

After the desorption of the absorbent through the solvent condenser back to the absorption tower. VOCs gas desorbed through the condenser, a gas-liquid separator with pure VOCs gas leaving the stripper, be recycled. The technology is suitable for gas purification with higher VOCs concentration and lower temperature, and other conditions need to be adjusted accordingly.

.

Adsorption equipment

When processing fluid mixture in a porous solid material, a group of fluid or some set of points can be suction surface and concentrating on it. This phenomenon known as the adsorption. When the waste gas is adsorbed, the adsorbed object is gaseous pollutant and gas - solid adsorption.. The gas component adsorbed is called the adsorbent, and the porous solid substance is called an adsorbent..

When the solid surface is adsorbed, a adsorbed adsorbed mass can be separated from the surface of the adsorbent, and the adsorbed material is attached to the surface of the adsorbent.. And when the adsorption time, surface adsorbate concentration due to the adsorption capacity decreased and adsorption purification request, then you need to by some measures the adsorption agent adsorbed on the adsorbate desorption, to CO adsorption capacity, the process called for the regeneration of the adsorbent.

So in the actual adsorption engineering, it is the recycling process of adsorption and adsorption, to remove the waste gas and the useful components of the waste gas..

Organic waste gas combustion and catalytic purification equipment

Combustion method for treatment of high concentration of VOC and odor compounds is very effective, the principle is burn these impurities with excess air, most generated carbon dioxide and water vapor, emissions into the atmosphere. But when the treatment of chlorine and sulfur containing organic compounds, combustion product generating HCl and SO2 and need to of combustion gas for further processing.

Treatment of low temperature plasma for industrial organic waste gas

The plasma is a gas in the ionized state, and its English name is plasma, which is named after the American science Muir, in 1927 when the discharge phenomenon of mercury vapor at low pressure is studied.. Plasma by the composition of a large number of sub, neutral atoms, excit


Product Tags:

organic waste converter

      

mtu gas engine generator set

      

gas absorption tower

      
China Customized Inflatable Bumper Ball Game Bubble Adult Grass CE supplier

Organic waste gas processing complete sets of equipment system Images

Inquiry Cart 0
Send your message to this supplier
 
From:
To: Shanghai Duoke Energy TechnologyCo., Ltd
Subject:
Message:
Characters Remaining: (0/3000)
 

Home| Products| Suppliers| Quality Suppliers| Site Map |About Us |Contact Us |Help |关于我们 |联系我们

Copyright © 2009 - 2020 entremaqueros.com. All rights reserved.