Categories | Tubular Steel Pole |
---|---|
Brand Name: | Futao |
Model Number: | 11M |
Certification: | ISO9001:2008 |
Place of Origin: | CHINA |
MOQ: | 10 pieces |
Price: | $80-$400 |
Payment Terms: | L/C, T/T |
Supply Ability: | 3000 pieces every month |
Delivery Time: | 52workdays |
Packaging Details: | 40HC or OT wrap by mat or straw mat |
Surface Treatment: | Hot Dip Galvanized |
Height: | According to clients' request |
Thickness: | 3-4.5mm |
Welding: | AWS D 1.1 |
Material: | Q235, Q345 |
Shape: | Tubular |
Color: | According to clients request |
Company Info. |
Yixing Futao Metal Structural Unit Co. Ltd |
Verified Supplier |
View Contact Details |
Product List |
3-4.5mm Thickness Tubular Steel Pole Steel Power Poles Low Voltage
With Stay
Product Description
The products above are 13M Tubular Steel Poles for the support of
Low Voltage with stay
made specifically for power distribution for low voltage
To design in accordance with PLS software, we will require the
following design parameters:
Product Specifications
The following is applicable unless otherwise is mentioned:
a. Maximum Ambient Temperature 50 Co
b. Minimum Ambient Temperature -10 Co
c. Design temperature 45 Co
d. Maximum daily range of air temperature 20 Co
e. Maximum Wind Pressure 420 n/m2
f. Ice Thickness 10 mm.
g. Snow Falls 1-4 days – 30 cm.
h. Site altitude 0-1400m ASL
i. Average annual rainfall 40cm during November–April
j. Relative humidity in the range 30 to 60%.
k. Average number of thunder storms 15 days / year
l. Prevailing wind winter average daily approximately 5-8 m/s, with gust up to 30 m/s.
m. Summer wind average afternoon 10-13 m/s, during morning
generally light and variable, gust speed up to 30 m/s.
2. General Contract Description: Tubular steel poles being supplied under this contract shall be
used by the purchaser as supports for carrying Low Voltage,
Overhead electric network conductors.
3. Applicable Standards that shall be followed as minimum requirements accordance to BS EN
10255/2004 medium and astma53/ a53m-2012 for 9met , 9 met poles
4. Free from defects : Poles shall be well finished, clean and free
from harmful
5.1 Deflection Test
Each pole shall be rigidly supported for a distance from the butt
end equal to the depth which it is to be planted in the ground. It
shall then be loaded as cantilever and the appropriate deflection
load of Table applied at right angles of the axis of pole 30 cm
from the top of the poles up to 9 m ( overall ) and 60 cm from the
top for poles over 9 m ( overall). For convenience in testing, the
pole may be fixed horizontally and the load applied vertically. The
temporary deflection due to the applied load at the point of
application of load shall not exceed 157.5 mm.
5.2 Permanent Set Test
This test shall be carried out immediately after the deflection
test. After application of proper load specified in Table 1 the
permanent set measured from the zero position after the release of
the appropriate applied load at the point of application of the
load shall not exceed 13 mm.
5.3 Drop Test
The test shall be made in the case of swagged poles. The pole shall
be dropped vertically with the butt end (bottom end) downwards,
three times in succession from a height of 2 m on to a hardwood
block 150 mm thick laid on concrete foundation. The pole shall not
show any signs of telescoping or loosening of joints. Chapter 2.
Technical Specification for 11kv lines 2-4 GSEEP/W/ICB-03
2073/74-03
5.4 Should of any of the poles selected fail to pass any of the
tests specified above two further poles shall be selected for
testing from the same lot in respect of each failure. Should both
these additional poles fail, the test material represented by the
test samples shall be deemed as not complying with these
specifications.
6.0 Quality Assurance Program
Along with the Bid the Bidder shall furnish quality assurance
program of the manufacturer which includes the Quality System and
the Quality Plans, which shall include, among others, information
to meet the following requirement, failing which the Bid shall be
liable for rejection.
i. The structure of the organization;
ii. The duties and responsibilities assigned to staff ensuring
quality of works;
iii. The system for purchasing, taking delivery and verification of
materials;
iv. The system for ensuring quality of workmanship;
v. The quality assurance arrangement shall conform to relevant
requirements of ISO9001:2000;
vi. Statement giving list of important raw materials, names of
manufacturer for the raw materials, list of standards according to
which the raw materials are tested, list of test normally carried
out on raw materials;
vii. List of manufacturing facilities available with supporting
documents;
viii. List of areas in manufacturing process, where stage
inspections are normally carried out for quality control and
details of such tests and inspections;
ix. List of testing equipment available with the manufacturer for
final testing of equipment specified and the test plant limitation,
if any, vis-à-vis the type, special, acceptance and routine tests
specified in the relevant standards.
7. Bid Documentations
7.1 The Bidder shall provide with the Bid two (2) clear copies of
the governing standards for selections of steel tubings, and any
standard followed in the fabrication and testing of the poles
offered.
7.2 The Bidder shall provide a description and certified
dimensional drawings of each type of pole.
7.3 Two (2) clear certified copies of all type tests performed on
similar type of poles and similar working loads otherwise the bid
offer shall be rejected. The type test must have been carried out
in recognized national or international testing laboratory or
independent testing laboratory other than manufacturer.
7.4 A clause-by-clause commentary of specification, specifying
compliance and deviations, if any.
7.5 All data, drawings, catalogues and other technical documents
shall be bound separately from the Bid documents.
Chapter 2. Technical Specification for 11kv lines 2-5
GSEEP/W/ICB-03 2073/74-03
Process of Production
Verification of Materials → Cutting → Molding or Bending → Vertical
Welding → Verification of Dimensions → Flange Welding → Hole
Drilling → Calibration→ Deburring Process → Galvanizing, Powder
Coating or Painting → Recalibration → Threading → Packaging
FAQ
Q1. How can I get a price of needed pole? |
A: 1. Please provide exact dimensions such as height, pole shaft
material type and thickness, top and bottom diameters. We can then
give you an accurate quotation based on your specifications. |
Q2. I am a small wholesaler; do you accept a small order? |
A: It's not a problem if you are a small wholesaler; we accept orders of various quantities. |
Q3. I am a designer; Can you help me to produce the sample which we designed? |
A: Our mission is to help our customers be successful. We are more than happy to help you solve any problems that you may have. |
Q4: We want be your agent for our area. How do I apply for this? |
A: Please send your proposal and your company profile. |
Q5. Tell me about your company? |
We have been a manufacturer and exporter of all kinds of steel poles including power poles, street lighting poles, telecommunications poles and other steel based products since 2000. Our products have been exported to many regions around the world. |
Q6. Do you have some special policies for Branded companies? |
A: Yes, we have some special support for the company who has own brand but are also in our VIP customers list. Please send us a copy of your sales data so we can analyze the best course of action in supporting you for your products in your market. |
Q7. Do you provide Door to Door service? Because i don't know how to deal with customs clearance. |
A: We provide Door to Door service to help you reduce shipping time and costs. This is because we have additional discounts with the shipping companies as we have done many shipments in the past. This in turn will save you lots of time and money. |
Welcome to our factory!
Friendly Links: www.everychina.com
Home| Products| Suppliers| Quality Suppliers| Site Map |About Us |Contact Us |Help |关于我们 |联系我们