SC(B) 10 series 10 KV 50KVA dry type cast resin transformer for
Applied Standards : GB/T 10228, GB1094.11, IEC60076-11, DIN42523
Through the "three-phase five-limb" structure, frame structure and
the rational design, the core is protected to prevent the core from
being affected by externally applied forces and thus to ensure its
no-load performance. During core mould designing, computer
simulation analysis is carried out for precisely calculating the
vibration frequency and scale, thus to avoid cavity resonance
produced by core structure during operation. During production,
special vibration-reducing and noise-decreasing materials are used.
All these measures are for reducing the transformer's noise during
HV winding is manufactured with high quality copper wire,
reinforced with glass fiber and being casted with epoxy resin at
vacuum state with pressure, having the resin fully impregnated into
the coils in the most professional imported equipment. Therefore,
product's partial discharge is especially low, for example,
transformer of 10kV-level has only a partial discharge less than 5
pC. During the HV winding design, rational structure is adopted to
improve the electric distribution. With the lighting impulse wave
simulation calculation and analysis being carried out through
special auxiliary computer software, product's anti-lightning
impulse capacity is greatly improved.
LVwinding (with the rated power equal to or higher than 200kVA) is
manufactured with high quality foil conductor, resulting in
excellent ampere-turn balance, low transverse magnetic flux leakage
and higher anti-short circuit capability. By designing reasonable
air conduit in the windings to increase the heat-dispersion
surface, transformer's temperature rise is effectively controlled
and the overload capacity is greatly improved.
Pearl Electric Co., Ltd
Located in Guangzhou city, Guangdong province,China, about two
hours drive away from Hongkong International Airport. Established
in 1958 with 61 years history in designing, manufacturing and
suppling power transformers.
Our main power transformers:
1.) 220KV and below-220KV oil-immersed power transformer
2.) 35KV and below-35KV dry -type transformer
3.) Substation transformers
5.) Other power transmission and transformation equipment.
ISO9001:2008, ISO14001:2004, GB/T28001-2001
KEMA, CE, CNAS, PCCC.
Our buyer transformer purchasers and agents
Any need for power transformer, please feel free to contact us:
Sandy | Oversea sales | Oversea Dept.
Pearl Electric Co., Ltd.
Add: No. 118 Donghuan Road, Donghuan Street, Panyu Distric,
Guangzhou City, Guangdong Province, China.