SMT Paste Stencil
600mm x 500mm
Maximum Sheet Size
850mm x 800mm
0.1mm (4Mil), 0.125mm (5Mil), 0.15mm (6Mil), 0.18mm (7Mil) or 0.2mm
(8Mil), 0.25 (10Mil), 0.3 (12Mil)
Pcb Steel Mesh Solder Paste Stencil
1) Size37* 47cm, 58*58cm, 60*40cm, 55*65cm, 40*70cm, 40*80cm, 40*
2) ETA High precision
3) Laser stencil
4) We can make the SMT stencil according to the different Reqeust.
5) Leadtime: 1 day
1. Excellent quality for SMT assemly
2. Reasonable price
3. Small order accept
1. How do FOUND ensure quality?
Our high quality standard is achieved with the following.
1.The process is strictly controlled under ISO 9001:2008 standards.
2.Extensive use of software in managing the production process
3.State-of-art testing equipments and tools. E.g. Flying Probe,
X-ray Inspection, AOI (Automated Optical Inspector) and ICT
4.Dedicated quality assurance team with failure case analysis
5.Continuous staff training and education
2. How do FOUND keep your price competitive?
Over the last decade, prices of many raw materials (e.g. copper,
chemicals) had doubled, tripled or quadrupled; Chinese currency RMB
had appreciated 31% over US dollar; And our labor cost also
increased significantly. However, FOUND have kept our pricing
steady. This owns entirely to our innovations in reducing cost,
avoiding wastes and improving efficiency. Our prices are very
competitive in the industry at the same quality level.
We believe in a win-win partnership with our customers. Our
partnership will be mutually beneficial if we can provide you an
edge on cost and quality.
3. What kinds of boards can FOUND process?
Common FR4, high-TG and halogen-free boards, Rogers, Arlon, Telfon,
aluminum/copper-based boards, PI, etc.
4. What data are needed for PCB production?
It is best to provide data in Gerber 274-X format. In addition,
Cam350, CAD, Protel 99se, PADS, DXP and Eagle can also be
5. What’s the typical process flow for multi-layer PCB?
Material cutting → Inner dry film → inner etching → Inner AOI →
Multi-bond → Layer stack up Pressing → Drilling → PTH → Panel
Plating → Outer Dry Film → Pattern Plating → Outer etching → Outer
AOI → Solder Mask → Component Mark → Surface finish → Routing → E/T
→ Visual Inspection.
6. What’s the key equipments for HDI manufacturing?
Key equipment list is as following: Laser drilling machine,
Pressing machine, VCP line, Automatic Exposing machine, LDI and
The equipments we have are the best in the industry, laser drilling
machines are from Mitsubishi and Hitachi, LDI machines are from
Screen(Japan), Automatic Exposing machines are also from Hitachi,
all of them make we can meet customer’s technical requirements.
7. How many types of surface finish FOUND can do?
FOUND has the full series of surface finish, such as: ENIG, OSP,
LF-HASL, gold plating (soft/hard), immersion silver, Tin, silver
plating, immersion tin plating, carbon ink and etc. .. OSP,
ENIG, OSP + ENIG commonly used on the HDI, we usually recommend
that you use a client or OSP OSP + ENIG if BGA PAD size less than
8. What’s your capability for FPC? Can FOUND provide SMT service
FOUND can fabricate FPC from single layer to 8 layer, the working
panel size can be as large as 2000mm*240mm.
We also provide SMT one stop service to customer.