1.Operating voltage 120~277Vac, 50Hz
2.Rated load 120V@400W;220-240V@800W;277V@1000W
3.HF system 5.8GHz±75MHz, ISM wave band
4.Transmitting power <0.5mW
5.Power consumption ≤0.5W(standby)
6.Detection zone Max.(D x H): 16m x 15m
7.Detection sensitivity 25% / 50% / 75% / 100%
8.Hold time 5s / 30s / 90s / 3min / 20min / 30min
9.Daylight sensor 5Lux/15Lux/30Lux/50Lux/100Lux/Disable
10.Mounting height 15m Max.
11.Motion detection 0.5~3m/s
12.Detection angle 150°(wall installation)360°(ceiling
13.Operating temperature -20℃~60℃
1.Automatic switching based on motion and light level.
2.Zero-crossing point operation helps protect the sensor against
3.Super Compact size makes it suitable to fix within most
4.4-pole press-in terminal (L, N, N, L'), easy assembly.
5.Detection area, time delay and daylight threshold can be
precisely set via DIP switch.
6.Wide detection area, range up to 16m in diameter.
7.Support higher mounting height 15m Max.
8.MC002 is an innovative and active motion detector with HF system
5.8GHz. Motion can be detected through plastic, glass and thin
9.The sensor supplies a simple energy-saving solution to use light
only when and where you need it.
It automatically switches on/off light based on motion and ambient
Can control all kinds of lamps, for example, halogen, fluorescent
and LED lights.
Compact size and small casing, suitable to fix within most
luminaires. 4-pole press-in terminal (L, N, N, L'), very easy to
10As it uses the third generation Merrytek technology, normal
5.8GHz microwave module can easily reach high mounting high up to
This is an innovative motion sensor, switch on the light on
detection of movement, and switch off after a hold time when there
is no motion detected.
As built-in daylight sensor can read brightness value, the sensor
does not switch on the light if with sufficient natural light.