Sign In | Join Free | My entremaqueros.com
entremaqueros.com
Products
Search by Category
Home > Metal Moulding Machinery >

450/13 DT Large Wire Drawing Machine Small Slip Rate For Single Bare Copper Wire

Categories Rod Breakdown Machine
Brand Name: HXE
Model Number: 13DT
Certification: ISO/SGS
Place of Origin: China(Mainland)
MOQ: 1 set
Price: Negotiable
Payment Terms: T/T, L/C
Supply Ability: 10 sets per year
Delivery Time: 70-90 work days
Packaging Details: Packed with plastic film, U-steel under the machine, 40HQ,20GP container
Usage: Drawing and annealing
Inlet diameter: 8mm
Outlet diameter: 1.2mm-4.5mm
Main motor: 280KW
Power source: 380V/50-60HZ
After-sale service: Engineer Available to Overseas
Product name: Rod breakdown machine
Drawing material: copper/copper alloy
  • Haven't found right suppliers
  • Our buyer assistants can help you find the most suitable, 100% reliable suppliers from China.
  • And this service is free of charge.
  • we have buyer assistants who speak English, French, Spanish......and we are ready to help you anytime!
  • Submit Buying Request
    • Product Details
    • Company Profile

    450/13 DT Large Wire Drawing Machine Small Slip Rate For Single Bare Copper Wire

    HXE-450/13DL Copper rod breakdown machine with continuous annealing machine


    I. Quick details


    HXE-450/13DL Copper rod breakdown machine is used to draw and anneal single bare copper wire from 8mm to 1.2mm-4.5mm.The drawing capstans are arranged in a line that are able to work continuously with drawing speed and electrical control can be matched with each other.


    II. Compositions of equipment


    NameQuantity
    1. Cantilever Pay-off shelf1
    2. HXE-450/13DL Main drawing machine1
    3. HXE-TH450 Annealing machine1
    4. HXE-180 Tension controller1
    5. HXE-WF800 Coiler & Basket changer system1
    6. HXE-SX630 Double spoolers1
    7. Electrical cabinet2
    8. Operation panel / With PLC&Touching screen1
    9. Steam generator 24KW1
    10. Wire Pointing & Threading machine1
    11. Copper power filter1
    12. Gear oil station1
    13. Air compressor & Air tank1
    14. Butt welding machine (For 8mm copper rod)1
    15. Spare parts

    III. Main technical parameters


    1. Inlet8mm (Inlet wire straightening function is provided)
    2. Outlet1.2mm-4.5mm (Final die rotation function is provided)
    3. Diameter of capstans450mm
    4. Speed1500m/min, Capacity say 1.2mm, 780kg per hour
    5. Slip ratio1.4-1.2 decrease
    6. Quantity of capstan13
    7. CapstanTungsten carbide (With wire threading function)
    8. Quick dies changeAvailable / Require less dies
    9. Main motorDC280KW, with DC Controller
    10. Fix speed motorDC75KW, with DC Controller
    11. GearChangeable
    12. Noises of machine≤85 db
    13. Protection coverMotor transmission cover installed
    14. OthersHeat exchanger for Gear oil is provided
    15. OthersAll main pipes are provided
    16. Others Gear oil station system is provided, including: Pump, Gear oil tank, Pipes, Oil Pressure Gauge, Signal wire.
    17. Others Heat exchanger for Lubrication oil and Heat exchanger for cooling water, no need. You need prepare one Underground Tank for Lubrication Oil recycle, one Water Tower for Cooling Water recycle.

    IV. Attention

    4-1. If wire breaks, will stop automatically, and the Fault Indicator light will open.

    After connect the wire, press the Fault Reset button(Yellow button) and the On button (Green button), to run the machine again.

    4-2. Press Emergency Stop button(Red button) to shut down the machine immediately.

    After solve, press the button again to run the machine.

    4-3. After set the Length-counter, the machine will stop automatically when reach the length set.

    After change the Spool, please press the Length Reset button(Yellow button) and the Spool Reset button(Yellow button) to run the machine again.

    4-4. After the machine stop(no running at all), then switch the Pump switch to stop the lubrication.

    4-5. Do not touch the wire in the Annealing section.

    4-6. After shut down the machine, need at least 30 seconds to restart the machine.

    4-7. Wire often breaks, adjust the speed, balance arm, check the dies are clean or not.

    4-8. If has scratch on the surface of the wire, check the capstans on the Take-up part. Check the drawing capstans.


    V. Machine maintenance and precautions


    1. Make sure the machine and the capstans clean, no scrap, no break wire.

    2. Make sure the Take-up part clean.

    3. Electrical cabinet should be closed.

    4. Change belts if worn out.

    5. Only qualified electrical technician can repair the electrical part.

    6. Never change the Inverter parameter.

    7. If something wrong with the machine that can`t solve, please contact the supplier first.

    Do not open the machine without consulting to the supplier.

    8. Put lubrication oil to the parts regularly, to make sure all parts running fluently. After running 1000 hours, clean all the bearings.

    9. Annealed nickel belt and Annealing carbon brush are consuming parts. If spark happens a lot on the annealing capstans, then should change the nickel belt. If the carbon is going to run out, then need to change a new set.



    Quality 450/13 DT Large Wire Drawing Machine Small Slip Rate For Single Bare Copper Wire for sale
    Send your message to this supplier
     
    *From:
    *To: Suzhou Hengxie Machinery Co., Ltd
    *Subject:
    *Message:
    Characters Remaining: (0/3000)
     
    Inquiry Cart 0

    Friendly Links: www.everychina.com

    Home| Products| Suppliers| Quality Suppliers| Site Map |About Us |Contact Us |Help |关于我们 |联系我们

    Copyright © 2009 - 2024 entremaqueros.com. All rights reserved.