CGF8-8-3 PET bottle Washing / filling / capping machine is a
three-in-one combination of our advanced technology of atmospheric
pressure filling technique, and it is the application of
independent research and development, it will be the same with pure
water and mineral water advanced bottling models. This machine
adopts conveying way for clip bottles’ lips, only need to replace
very few parts, it can be applied to a variety of bottle type,
smooth delivery. Filling method is Atmospheric pressure filling.
★The main frame adopts structural steel, 304 stainless steel
exterior layer, 304 stainless steel frame, round steel adjustable
★Conveying system adopts star wheel, smooth transmission, stainless
steel chain, it will be a smaller deformation.
★Number of washing clips is 8, 304 stainless steel chassis wash
pipes are heat-resistant.
★Number of filling valve is 8, and parts contacted with product are
304L stainless steel. Inner surface is dealt with polishing. There
is stainless steel returning tube, no dead space.
★Number of capping head is 3, screw head using magnetic torque
device to facilitate torque adjustment, it can be set the size of
the first torque of capping in accordance with the actual
★Main Motor and Gearbox with frequency controller, transmission for
sports bodies are gears, run smooth, all-round star bottle
components are engineering plastics, with security agencies.
★With PLC, transducer, relay, photoelectric switch, imported sensor
switch relay components, touch screen operation panel, pneumatic
- Overall dimension(mm): 2000*1550*2000
- Production capacity:2000-3000 b/h(500ml)
- Suitable bottle sizes: 300ml-1500ml
Bottle diameter: Φ50-Φ88mm, bottle height: 150－320mm
- Pressure of air source: 0.6Mpa
- Used air:0.3㎡3/min
- Water pressure of washing bottles:0.2-0.25Mpa
- Used water of washing bottles:0.5 T/h(Max. it can be adjusted)
9. Filling mode:Atmospheric pressure filling
10. Total capacity of motor:3.8Kw
11. Rating pressure；380V50Hz
12. Weight: 1500kg
13. The machine includes: 2M air conveying system in front, 2M
conveying system for bottles out in back, cap elevator (air