5A Lightweight Household Portable Air Dehumidifier For
Products details :
|Power input||12V ,5A|
|Dehumidify capacity(30°C/RH=85%)||500mL / Day|
|Rated Input||12V ,5A|
|Body Size (mm)DxWxH||203×152×305 mm|
- Peltier thermal electric module 12V D.C 5A
- 120mm brushless D.C fan
- 1000ml water tank
- Retractable handle
- Removable front grill
- De-humidifying ability: about 500ml/day at 85% RH. 30℃
- Automatic cut-off when water tank is full
- Electronic switching sensors
- 70℃ safety cut-off
- Switching mode power adaptor 100-240Va.c 50/60Hz
- Dimensions: 203×152×305 mm
Portable evaporative dehumidifier DH100 is made by brand new
plastic, good quality compressor and relevant spare parts. This
product is multifunctional dehumidifier, which can be set humidity
level according to different requirement. The appearance is very
fashional and nice. This model is selling very well and popular all
over the word with the very good price performance.
This product is designed to be portable, with a handle attached for
ease of transport. Its dehumidifying capability is ideal for small
spaces like wardrobes, pantries, small bedrooms etc. The front
grill may be removed for cleaning. Electronic sensors monitor the
water level such that the unit turns off automatically when the
water tank is full. The unit also automatically shuts off in
response to potential overheating due to fan failure.
At the heart of the unit is a Peltier thermal electric device which
cools down the aluminum heat sink in the front. This causes water
vapor to condense and be collected by the water tank below. The
cool, dehumidified air is then sucked in by the fan at the back,
blown onto the hot heat sink, and then released through the top of
There are three versions of this unit – the DH100 (a basic
dehumidifier), the DH100N (with negative ionizer output) and DH100Z
(with ozone output).
There are four items in the box:
- The DH100 unit
- The mains cable
- The switching mode power supply
- The instruction manual
Remove all items from the package. Plug the flat rectangular D.C
power plug of the switching mode power adaptor into the only socket
located at the back of the unit, and plug the appropriate mains
plug into the wall socket. Make sure the water tank is properly
fitted into place for the power detector to be activated.
- Remove the D.C plug first when the unit is being carried around
- Remove the front grill to clean the cold heat sink from time to
- Place the unit on a flat surface
Q1: Why do I need dehumidifier?
A1: If your home always be in a humid conditions, it will growth
High levels of humidity can influence your mood and cause problems with sleep.
Q2: Are you a trading company or manufacture?
A2: We are leading manufacturer of dehumidifiers,
specializing in dehumidifier for more than 10 years.
Q3: Can I visit your factory?
A3: We warmly welcome you come to visit us at Compenex Electronic v
MFG CO.,LTD, Guangdong province.