Automatic Four Corner Pasting Machine WM-40A to Pasting the Rigid
Gift Boxes Four Corner in Once Time with High Speed
Rigid Box Product flew
This machine use for pasting box corner of all kind rigid boxes .
1. The time of sticking angle is as short as 0.1 seconds, and the
fastest speed of sticking angle is 5000 per hour.e.
2. Adjust the grey board size is very simple with fast time.
3. Adjusting the length of the tape is also very convenient and
4. Adjust the box size for pasting are convenient and fast.
5. High speed automatic feeding the grey board and automatic
pasting the four corner in once time finished.
6. Use moulds to postion the rigid box to automtic pasting the box
corner by high speed.
7. With auxiliary carton forming device, it is convenient for all
kinds of cartons to stick corners perfectly.
8. Replacement of cartons and moulds of different sizes is simple
|MAX.SIZE OF BOX||400*300*120mm|
|MIN.SIZE OF BOX||40x40x10mm|
|MACHINE SIZE||L2000 X W1180 X H1970MM|
Automatic Four Corner Pasting Machine WM-40A is the best equipment
to produce high-grade rigid boxes. Reasonable design, stable
performance, equivalent to the international leading technology
level. Adopt PLC programmable controller,high speed belt to feeding
the grey board by automatic , touch human-machine interface.
Realize the automatic grey board sending and pasting the four
corner with hotmelt tape by moulding of one-time finish. The
machine production efficiency is several times higher than that of
the traditional craft production, also have fault diagnosis display
and alarm function, operation safety guarantee. Suitable for making
the high-quality goods class electronic box, jewelry box, and other
high-grade packing gift box cover heaven and earth.
1. The length of adhesive tape can be adjusted between 10-50mm
length by once for the different boxes.
2. The machine can use various hot-melt adhesive tape, the width is
usually 19mm.other width of tape have to special to make it .
3. The mainshaft adopts servo motor to drive the gear guide rail,
making sure every accurate movement.
4. All electric parts are from famous brand, low error and high
5. Grey Boards are fed from bottom, thus no need to stop the
machine for adding boards.
6. The machine adopts single arm press device and thermostatic
temperature control system.
7. With malfunction alarm and fault display.
8. Operated by touch screen, with both Chinese and English by one
9. Stepper motors feed hot melt tapes which are pasted onto 4
corners at the same time
10. the machine simple operation, fast working speed, high
production efficiency, high cost performance.
1. Compliance with safety precautions during production can prevent
accidents and potential hazards.
2. When problems are found, please solve them in time. We can't
continue production without problems.
3. Please designate professionals to train on-the-job operation and
4. Verify whether the equipment is in normal condition before the
equipment is running, such as checking the air pressure, resetting
the mould, etc.
5. Before production, please wear labor protection equipment to
ensure the health and safety of operators.
6. The equipment can not touch any rotating parts and movable parts
in the operation process, so as to avoid causing personal injury.
7. Keep all air passages open.
8. It is forbidden to touch the high-temperature head-mounted parts
by hand after being heated by electricity.
9. No touch adjustment is allowed when the equipment is running.
We attended at least three oversea exhibitions every year to show
our products to clients, warmly welcome to visit our booth in the
Packing and Shipping
Packaging by wooden case and shipping by containers.