Blind hole 8mm shaft K38 optical rotary encoders AB phase NPN
output dc10-30V rotary encoder
Hollow shaft diameter 6mm, 6.35mm, 8mm
Through hole or blind hole shaft
Protection level grade IP50 or IP65
Circuit signal output: NPN, PNP, Voltage output, Push-pull, Line
Resolution(PPR):Min 50ppr, Max 16384ppr
IP grade IP50 or IP65
Installation dimension 45mm
Output Phase: A-,B-, or ABZ or A+B+Z+A-B-Z-
Gross weight 140 grams
|Encoder type||Incremental encoder|
|Environmental temperature||Operating temperature: -20~+90° (Non icing)|
|Storage temperature: -25~+100° (Non icing)|
|Environmental humanity||Operating and storage: 35~85%RH (non-condensing)|
|Shell||Die cast aluminum|
|Consumption current||100mA Max|
|Shaft Load||Radial: 40N; Axial:20N|
|Top REV||5000RPM ;IP65≤3000r rpm|
|Insulation strength||AC500V 60s|
|Mark to Space ratio||45% to 55%|
|Top Response Frequency||300kHz Max|
|Shell Material||Die cast aluminum|
|Bearing life||1.5x109 revs at rated load(100000hrs at 2500RPM)|
|GND||not connect to encoder|
|Shaft Material||Stainless steel|
|Vibration(endure)||Amplitude 0.75mm,5-55Hz,2 hours for X/Y/Z direction individually|
|Shock(endure)||490m/s2,11 ms three times for X,Y,Z direction individually|
|Protection grade||IP50 ; IP65|
Over 18 years encoder production experience
More than 20 years experienced engineers
Own brand and unique brand
CE certification for all models
Prompt delivery date
100% full inspection before shipment
Q: Where can I download the encoder catalogue or datasheet?
A: You could visit our official website or email us directly to the
Q: What parameters are requested before ordering an encoder?
A: You should get some basic parameters before you start to order.
Such as installation dimensions, resolutions, circuit signal, power
supply voltage, etc.
If you have any doubt on selecting the model, you are welcome to
contact us for more assistant.
Q: Where is your factory?
A: Our factory is located on Shanghai City.
Q: Can I pay a visit to your factory?
A: Yes, you we welcome to visit our factory at any time if
Q: What’s your MOQ?
Q: How to order your encoder?
A: Contact us, or email us, we will reply you as soon as possible.
Q: Are you a factory or a trading company?
A: we are 100% factory with our brand.
Q: What’s your brand?
1. for 1-10 samples: 3-5 working days
2. for 20-50 mass production: 7-10 working days
3. for over 100pcs, production will be discussed with customers and
ship on time
The encoders can be selected with cable or connector. If you choose
the connector option, you will need a mating connector or a cordset
(both connector and cable). This will give you a connection point
to the encoder but does not necessarily get you all the way to your
control cabinet. Depending on the distance, you may need a junction
box, conduit, and cable tray. Care should be taken when routing
encoder cable to reduce the influence of "noise". To reduce this
influence, the cable should have a braided shield around the wires
and the wires should be twisted pair. The encoder cable should be
in a conduit with only low DCV cables and keep AC and high-power
cables separated. If there are cable trays with AC and DC cables,
there should be a grounded metal divider between the DC and AC
cables. If the encoder cable does need to cross an AC cable, it
should cross perpendicular (90 degrees to each other). The shield
should be connected to one earth ground location in your control
cabinet (so it has a star topology).
1. Goods can shipped via TNT, FedEx, UPS, DHL, EMS, etc.
2. You could select the express according to your requirements if
3. If you do not have any courier account, we will check and find a
cheapest and safety express for you.
4. Our factory has 30% discount with most courier company, so price
could be as cheap as possible.
1. T/T, western union, credit card, Paypal, etc
2. 3-5 working days after payment received
3. Encoders will be shipped once ready