Welding Connection Industrial Stainless Steel Pipe Clamps
Anodization Surface Finishing
1.name:Wall Mount Pipe Bracket With Nut Tapping Screw Nylon Plug
Stainless Steel 304 Cast Iron Pipe Clamps
3.size:pipe clamp: 1“-12”, Can be customized.
screw/bolt:M2-M30, Can be customized.
4.Surface Finishing:zinc plated,coating,sandblasting,
5.Application:Building,heating pipeline, water pipeline, gas
7.Product feature:Volt-endurance;torque balance;large adjustment
1).Use the open internal and external circle structure,and with
It is effectively to solve the problem that when small diameter
connect the hared tube,it is easy appear dead angle,and liquid or
leakage problem.Easy structure,Easy maked.
2).Edge is no burrfree,it is ability to prevent the tube damage
3).By a efficiently hydrogen relief treatment,long-term use needn't
worry fracture and other problems
4).Accord with DIN3017 Standard.By 48 hours salt and fog test,it
good corrosion resistance
5).By last 36 hours elastic test,to insure a high strength
6).Easy to fix.
7).As a professional manufacturer, we can offer all kinds of the
vlaves and can manufacture them according to any design.
Pipe lines,such as heating,sanitary and waste water pipes,to
walls,cellings and floors.
|REF||Welded nut||Thick-width||Two side screw||SIZE(size range)|
|HEAVY PIPE CLAMPS-SS304|
|S137018||M8||2.5*20||M6X20||3/8" (16 - 18)|
|S137022||M8||2.5*20||M6X20||1/2" (20 - 22)|
|S137028||M8||2.5*20||M6X20||3/4" (25 - 28)|
|S137035||M8||2.5*20||M6X20||1" (31 - 35)|
|S137040||M8||2.5*20||M6X20||1 1/4" (39 - 43)|
|S137048||M8||2.5*20||M6X20||1.1/2" (45 - 48,5)|
|S137060||M8||2.5*20||M6X20||2" (58 - 61)|
|S137075||M10||2.5*30||M6X25||2.1/2" (73 - 76,5)|
|S137090||M10||2.5*30||M6X25||3" (86 - 89)|
|S137115||M10||2.5*30||M6X25||4" (110 - 115)|
Why choose us?
------Make your purchase Easy
· Enquiry replied under 2 hours
· High quality with competitive price
· 20 years experience for quality control
· samples & catalogs are free
· all size are available
· light weight, easy installation,fine-looking apperance
· less material consumption, can be easily cooled off and etc
· no hardware needed ,Screwless, clampless connections
Used for mounting of pipes to the walls ( vertical / horizontal ) ,
ceilings and floors
For Suspending Stationary Non-Insulated Copper Tubing Lines
Being fasteners for pipe lines such as heating, sanitary and waste
water pipes;to walls, ceilings and floors.
Side screws are protected against loss during assemble with the
help of plastic washers
The Pipe clamp can be used for the temporary installation of a pipe
run, no drilling or bolting required, no more cable ties or bits of
rope: a neat, tidy and quick installation can be achieved.
Pipe clamp can also be used for holding hydraulic lines, steel,
copper or plastic pipes in place to enable a permanent fixing to be