Inclusive Cement Render Machine Smooth Finishes Concrete Stucco
Rendering machine is a kind of construction machinery, which can plaster cement
mortar on the wall automatically.It is also called plastering
EZ-XP-1000 is a unique machinery designed for internal wall plastering.
Its automation instead of traditional manual plastering and professional finishing clear your worries behind.
XP is the newest rendering machine of latest tech.
1, EZ-RENDA brand was detail reported by CCTV10 I LOVE INVENTION on 24th May, 2013
2, Rendering machine releases the construction workers from the
XP is an ideal rendering machine for big and wide areas, such as
store, warehouse etc.
- Application: brick wall, block wall, cement wall, internal wall, house,
skyscraper, villa, construction
- Applied materials: cement, gypsum, lime, ready mix, perlite, clay mortar
Dimension of L/W/H
Remote Controller (Special Design)
( Normal )
Rendering Height Positioning Tool
(Instead of Old Mobile Ceiling Frame)
70 - 80 m²/hour
up to 4.2 m
( Standard Equipment Rendering Height 2.85-3.5M )
Length of Plastering trowel
Stainless Steel 304
Coating & Smoothing at the same time
EZ-RENDA brand was detail reported by CCTV10 I LOVE INVENTION on 24th May, 2013
Rendering machine releases the construction workers from the heavy
EZ RENDA Rendering Machine
less than 50 sqm
smooth & flat in horizontal & vertical level. Professional
always reveal crack, bubbles, etc.
Once coating while render up and smooth down
several times coating by numberless trowels
hydraulic system & traditional spot guide within 10 seconds
adjust planeness by square bar in circular arc movement
again & again
scaffolding, mop, trowel, square bar, lots of extra tools
two only. Effortless.
a lot more. Hard work.
saving 70% - 80% time
long time work
Promotion practical use of rendering machine(High efficiency of
1, One rendering machine equals to 10 people
2, The wall plastered by machine is much flatter than by manual
3, Reduces the labor intensity, improves the speed
4, Authorized and promoted by the professor in Tsinghua University
FAQ for the rendering machines:
1- Whether the machine could be used for the external wall and
No, it couldn’t at present. We are still working on it. It will
2- Whether the hollow and cracking could happen?
Hollows can be avoided because there are three vibrators behind the
mortar tank. It creats high pressure to the wall when machine
works. And watering before rendering the wall can avoid cracking.
3- How about the finishing effect? Whether it is smooth?
The finishing effect is definitely smooth, no hollow, no cracking.
The difference is less than 2mm.
4- How many people need to operate the machine effectively? What is
their division of labor?
Normally 3 people are enough to operate the machine, two people
operate the machine and one person is in charge of small area
5- How do we use the machine on walls with openings such as windows
and doors? Can it be done with the machine or do we have to do it
All models of machines can definitely render the area which is
below and above window.
For the machine VISTA and XP: Supply little mortar at first, when
the machine reach the open area, the mortar is nearly used up.
After the machine passed the open area, press the “STOP” button and
supply the mortar to render the top area then.
6- How is the machine cleaned after use?
After finish using the rendering machine, the cleaning job needed
to be done after the power is cut off. Use water to wash the
caster, plastering tank, directional pipes, extensions. The machine
body and the buttons could only be cleaned by the cloth.
7- What is the life for the m/c?
3-5 years at normal use
8- What maintenance is required at site?
- Clean the machine each time after finishing using.
- Oil mechanic parts daily and grease every week;
- Change gear box oil(18#gear oil with 350ml) every 3 months;
- Check each part of the machine and replace wearing parts regularly;
- Check wire rope daily and replace no more than one month. (VISTA);
- Add the hydraulic oil when needed;