Tupo-4 Wall Plastering Machine
Application wall plastering machine:
1.Automatic cement/mortar/lime/gypsum wall plastering machine used in
plastering inside walls.
2.It’s capable to render on bricks and blocks with cement mortar,
ready mix ,
lime mortar and gypsum mortar.
Standard parametersTupo-4 plastering machine
Plastering Capacity (8 hours )
380V/220V standard is 220V/50Hz single phase/three phase
standard up to3.5M , special up to4M
Weight of Machine
1-5Sets 3-7working days
30% deposite, balance before shipment.
One year since delivery
After Sales Service
We offer technical and spare part.
Main features Tupo-4 plastering machine:
TUPO machines are with CE Certificate strictly made according to
European security standard & patents right engaged
1. Wall Plastering Machine can reach the very top of the roof.
2. New AlluminiumAlloy main unit and stainless steel material
3.Original gear rack driving system enable output of main power is
more peaceful and stable.
4. Less failure rate.
5. Remote Control keep working in safety
6. Intelligent Wall Plastering Machine can make the wall smooth one
time within 1min.
7. Two mini vibrators on the Machine can avoid hollowness of walls,
ensured renderingquality and fully adhesive.
8. Machine equipped with omni-directional wheels. You can move it
9.adopt good quality Panasonic PLC,it can judge the operation mode
of different condition
10.Tupo used it special Power head which is researched and
developed by itself to drill the accessories .highly increase the
manufacturing precision and decrease working error or tolerance of
auto rendering machine.
11.allTupo machine’s Gas Spring are installed with special
protecting device. highly increase the life span of the machine
Tupo-4 advantage :
1. save 70% labor cost
2. increase productivity 10-15times
3.capable of rendering small area such as bathroom, terrace
4. shift machine conveniently when pass door or concrete beams of
ceiling no need to disassemble directional pipes
Co1 to prepare special construction scheme and construction
The contents of the program cerco punto di vendita automatic
rendering machine in italia to include: process: Grassroots
plastering before cleaning, sub acceptance (masonry structure,
hydropower, embedding, detection and identification of primary),
plastering thickness determination, grass-roots rectification, nap
before wet water, cut hair, RBI, basic water, bottom ash, fly ash,
cover edge, maintenance, test. The real amount, acceptance,
transfer. greatcity rendering machine 1000 width The main key
technology of intermittent time to grasp: one is the time interval,
the time interval is building two, napping, three is the bottom ash
and cover gray interval, rendering price four is the maintenance
interval. Scheme shall include the detection method, inspection
2 Mix: mix ratio of mortar, including the use of additives, to go
through the design approval and test, when necessary to test for
water quality. The mix design, to specify the quality requirements
of materials, ingredients, mixing techniques. Mix than actual, mix
and mix with the theory of field operation.
Procurement of materials, cement, sand, water, additives.
Procurement and use of materials, according to the list control,
there must be at least the amount of material procurement and
consumption with the record, compared to budget. Materials to be
witness sampling inspection in the field, but also to do a test
Tools and equipment: including mixing machine and tools, means of
transport, plastering tools, testing tools. Sometimes may have
missed some, such as sieve sand, bucket, sieve sand clay content
detection google rendering machine tools, slump and water detection
Staffing: rendering nachine managers, plasterer, testing personnel,
mixer, transport workers, unskilled laborer.
In the process of acceptance and handover. In addition to the item
such as masonry, concrete, water pipelines, the door window frame
installation, should also include the sub process contained in the
rendering process of acceptance, such as cleaning, watering,
chiseling, cake, control line. Must carry on the acceptance of
other kinds of finished product protection.
Face examination: including the operation safety
Safety and technical clarification: form is easy to go to work, not
easy to be attached. Construction should pay attention to the
following: mixing time, storage time, cover face mortar transport
on Grey time.
4 plastering construction
The construction contents include: to the mixer feeding, mixing,
transportation, storage, mortar wall, extrusion, scraping,
collecting surface, roughening, vertical construction of the
flatness detection, yin and yang angle etc..