Sign In | Join Free | My entremaqueros.com
entremaqueros.com
Products
Search by Category
Home > Other Copper >

H13 Tool Steel Round Bars

Categories tool steel/mould steel
Place of Origin: shenzhen
Brand Name: GSF
Model Number: H13
Certification: ISO-9001
Price: negotiate
Packaging Details: as customers's requirement
Delivery Time: 7-30 days after deposit
Payment Terms: T/T
Supply Ability: 500T/month
MOQ: 25 tons
  • Haven't found right suppliers
  • Our buyer assistants can help you find the most suitable, 100% reliable suppliers from China.
  • And this service is free of charge.
  • we have buyer assistants who speak English, French, Spanish......and we are ready to help you anytime!
  • Submit Buying Request
    • Product Details
    • Company Profile

    H13 Tool Steel Round Bars

    Applications
    Typical applications include die casting dies for aluminium, magnesium and zinc, extrusion dies for aluminium and brass, liners, mandrels, pressure pads, followers, bolsters, die cases, die holders and adaptor rings for copper and brass extrusion. H13 is used to produce hot stamping and press forge dies, split hot heading dies, gripper dies, hot punching, piercing and trimming tools. Other applications include plastic moulds, shear blades for hot work and hot swaging dies.
    Forging
    Preheat slowly to 750° C then increase the temperature more rapidly to 1050-1100 ° C. Do not forge below 850° C. It is essential to cool the H13 slowly after forging, either in a furnace or in vermiculite.
    Annealing
    Soak thoroughly at 840-860° C before furnace cooling at a maximum rate of 20° C per hour down to 600° C followed by cooling in air.
    Stress Relieving
    When tools made from H13 tool steel are heavily machined or ground, the relief of internal strains is advisable before hardening to minimise the possibility of distortion. Stress relieving should be done after rough machining. To stress relieve, heat the component carefully to 700° C, allow a good soaking period (two hours per 25mm of ruling section). Cool in the furnace or in air. The tools may then be finish machined before hardening.
    Hardening
    Preheat to 780-820° C. Soak thoroughly, then increase rapidly to the final hardening temperature of 1000-1030° C. When the H13 has attained this temperature, soak for approximately thrity minutes. Cool in air. Large sections may be quenched in oil. To reduce scaling or decarburisation, we recommend isothermal molten salt bath treatment. Preheat in salt at 780-820° C then transfer to salt bath standing at 1000-1030° C. Soak and quench into salt standing at 500-550° C. Allow to equalise, withdraw and cool in air. Alternatively, this tool steel may be vacuum hardened or pack hardened. Tools should be tempered as soon as they become hand warm.
    Tempering
    Heat uniformly to the required temperature allowing a soaking time of two hours per 25mm of ruling section. Withdraw from the furnace and allow to cool in air. A second tempering is strongly recommended, the H13 tool being allowed to cool to room temperature between tempers. The usual tempering range is 530-650° C depending on the hardness requirements and the operating temperature of the tool.
    Welding
    In general, we do not advise the welding of tool steel but users sometimes prefer to weld in order to avoid the cost of retooling. It should be remembered that this grade is an air hardening steel and that in welding the area of the weld attains a temperature of about 1000° C. Cracking is likely to occur during cooling unless proper precautions are taken. Popular methods of welding are atomic hydrogen and argon arc. We recommend you contact your welding consumables supplier who should provide you full assistance and information on welding tool steels.
    H13 Tool Steel
    Standard
    Steel NO.CSiMnCrMoVPSNi
    ChinaGB4Cr5MoSiV10.32 /
    0.45
    0.80 /
    1.20
    0.20 /
    0.50
    4.75 /
    5.50
    1.10 /
    1.75
    0.80 /
    1.20
    ≤0.030≤0.030_
    USAAISIH130.32 /
    0.45
    0.80 /
    1.20
    0.20/
    0.60
    4.75 /
    5.50
    1.10 /
    1.75
    0.80 /
    1.20
    ≤0.030≤0.030_
    Japan JISSKD610.35 /
    0.42
    0.80 /
    1.20
    0.25/0.504.80 /
    5.50
    1.00 /
    1.50
    0.80 /
    1.15
    ≤0.030≤0.030_
    GermanyDIN1.23440.37 /
    0.42
    0.90 /
    1.20
    0.30 /
    0.50
    4.80 /
    5.50
    1.20 /
    1.50
    0.90 /
    1.10
    ≤0.030≤0.030
    Quality H13 Tool Steel Round Bars for sale
    Send your message to this supplier
     
    *From:
    *To: Shenzhen Guangshenfa Metal Co., Ltd
    *Subject:
    *Message:
    Characters Remaining: (0/3000)
     
    Inquiry Cart 0

    Friendly Links: www.everychina.com

    Home| Products| Suppliers| Quality Suppliers| Site Map |About Us |Contact Us |Help |关于我们 |联系我们

    Copyright © 2009 - 2024 entremaqueros.com. All rights reserved.