Solar Power Pump Inverter
1. Solar Pump Inverter consists of 3 components:
2. irrigation solar water pump system
3.AC water pump
SETEC Power solar pump inverter system is designed to directly
drive the pumpwithout batterybut can reduce th econstruction and operating cost and routine
This inverter can adjust the output frenquency according to the
solar irradiaion intensity in real time to implement theMPPT(maximum power point tracking).
This device widely used in domestic water, irrigation water,
control of desert, animal husbandry, water supply for Sea Island,
water treatment projects, etc. Water storage replaces battery and
directly drives pumping, with high reliability, at the same time,
it canreduce system cost and maintenance costs. Water pump is driven by three phase AC inverter. Pumping water
from the deep well or rivers and lakes is poured into the water
tank/pool, or directly connect irrigation system and fountain
systems. According to actual demands and installation conditions,
there are various water pumps to choose, such as centrifugal pump,
mixed-flow pump, deep-well pump.
Instead of generating electricity to turn a motor, sunlight can be
concentrated on the heat exchanger of a Stirling engine and used to
drive a pump mechanically. This dispenses with the cost of solar
panels and electric equipment. In some cases the Stirling engine
may be suitable for local fabrication, eliminating the difficulty
of importing equipment. One form of Stirling engine is the fluidyne
engine which operates directly on the pumped fluid as a piston.
Fluidyne solar pumps have been studied since 1987At least one manufacturer has conducted tests with a Stirling solar
1. Water pump is driven by three-phase AC motor;
2. It adopts dynamic VI maximum power point tracking(MPPT) and
optimizes pure sine wave PWM control ,with fast response speed,
3. Full automatic operation, according to the actual conditions,it
can freely set the range of pump speed ;
4. The main circuit uses digital power module,with high
reliability, high conversion efficiency of 98%;
5. Have complete electrical protective function, it can choose
water level detection and control circuit, to prevent overflow and
6.Protection grade IP41, working environment temperature: -10°C ~ +
7.No need bettery(water storage replaces battery power storage)
8.Starting box is not required
9. LCD display, simple operation. setting parameters and fault
10.Low voltage drive function( LV40-70 special DC - DC converter
converts 39V-100V to 280V-420V to drive solar pump system,which
reduce the cost of solar panels and danger of DC high voltage)
11.AC drive fuction.(when sunshine is not enough ,AC city power is
switched to work manually)
1.LCD display, simple operation
2.AC drive function.When sunshine is not enough ,AC city power is
switch to work manually
3.Low voltage drive function.(LV40-70) converts 39V-100V to
280V-420V to drive solar pump system.
which can reduce the cost of solar panels and prevent the danger of
DC high voltage.
a) residents living water
c) desert control
d) animal husbandry
e) water apply for sea island
f) livestock watering
g) water treatment projects,etc.
|Packaging Details:||wooden box or follow the customers' requirement|
|Delivery Detail:||3 days|
Before out of the factory, we ensure the 5.5 kw solar grid tie
inverter quality isexcellentand it must be strictly checked. The company assures customers that
it is a good machine performance, mechanical integrity.
Established in 2004,ShenZhen SETEC POWER Co.,Ltd.is one of the
leading manufacturer in China specializing in
designing,researching,developing,producing and selling high-
frequency switching power supply,DC/AC power inverters, DC/DC
converter, Solar inverter, solar pump inverter,on grid inverters
and so on.we provide advanced technology and outstanding quality
products.Our customers are operators of domestic telecommunications
industry and power industry,broadcast industry,and related
ancillary equipment manufacturers,Our company provides not only
high-frequency switching power supply equipment for large telecom
operators,but also power supplies for the relevant supporting
manufactures.SETEC devotes ourselves to the national industry
development and introduces the advanced technology and management
experience from world-renowned enterpeises to build our own
7. CE Certificate
1. Solar pump system requires battery or not?
No need battery. Water storage replaces battery.
2.What’s main application ofsolarpump system?
The solar pumping system is widely used for sea island water
supply, desert controlling, daily life water supplying,
agricultural irrigation, forest irrigation, farm irrigation,
waterscape, and water treatment project.
3.Ifinverter is 220v/3phase, canit run380v, 3phasemotor?
NO. 220v/3phase solar pump invertercan’trun 380v/3phase motor.
4.What is your solar pump inverter protection?
A: dry well
B: output overload
C: over voltage
D: over temperature
F: over current
G: reverse polarity
5.Can you supply a weatherproof box to mount thesolar pumpinverter in?
Yes, we can.
Please feel free to contact us.