Noted: the machine should be tightly connected with the ground.
1.Get ready of the power, and press the power button, then the
power indicator is lightened.
2.Adjust the temperature to right range. When the temperature
reaches the right range, the indicator on the top of
temperature-adjuster is switch off. Then the following operations
can be conducted.
3.Adjust time-controller to right time.
4.Flatly place the cloth on the lower printing plate, then cover
the printing paper (please note the working surface of the paper),
push the handle down to specified point. Please notes that the
force should not more than 25kg at this time, or otherwise, the
handle will be transformed.